Skip to Content.
Sympa Menu

baslinux - Re: parport_pc disables mdacon, was Re: [BL] mdacon problem in BL2 on hard disk

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: parport_pc disables mdacon, was Re: [BL] mdacon problem in BL2 on hard disk
  • Date: Wed, 21 Jul 2004 21:38:53 -0000

Sindi Keesan wrote:
>
> The cure is not to automatically load the module
> during startup and just use it from a VGA terminal
> to print, then reboot and reload mdacon to use
> the TTL monitor again after printing.

Is rebooting really necessary? Can you not insmod
the module(s) and then reload mdacon?

Cheers,
Steven





Archive powered by MHonArc 2.6.24.

Top of Page