market-farming AT lists.ibiblio.org
Subject: Market Farming
List archive
- From: Steve Diver <steved AT ipa.net>
- To: Market Farming <market-farming AT lists.ibiblio.org>
- Subject: Re: [Market-farming] roll up sides
- Date: Mon, 15 Nov 2010 14:53:37 -0600
One way is to use those PVC Snap Clamps.
But we found those plastic clamps shrink/swell with temperatures and pop off.
So to really stay in place, you also need those steel clamps which hold onto
the plastic clamps. It adds to the cost but this setup stays in place.
It's an easy way to hold poly onto piping for side roll-up; also to hold shade
cloth onto top of PVC hoop house on the ends, etc
Steve Diver
On 11/15/2010 1:31 PM, Ryan Wood-Beauchamp wrote:
We're assembling a 14' x 46' greenhouse and are going to put roll up sides on it. We have 2 lengths of 1" galvanized piping that we intend to fasten to the edge of each side of plastic. My question is how to attach the plastic to the pipe. Any ideas?
-
[Market-farming] roll up sides,
Ryan Wood-Beauchamp, 11/15/2010
-
Re: [Market-farming] roll up sides,
Richard Robinson, 11/15/2010
- Re: [Market-farming] roll up sides, waldenfarm, 11/15/2010
- Re: [Market-farming] roll up sides, Steve Diver, 11/15/2010
-
Re: [Market-farming] roll up sides,
MAsteveINE, 11/15/2010
- Re: [Market-farming] re rants and photos, Road's End Farm, 11/15/2010
- [Market-farming] Screws, MAsteveINE, 11/15/2010
-
Re: [Market-farming] roll up sides,
Richard Robinson, 11/15/2010
Archive powered by MHonArc 2.6.24.