Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] roll up sides

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: Richard Robinson <rrobinson AT nasw.org>
  • To: Market Farming <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] roll up sides
  • Date: Mon, 15 Nov 2010 15:44:08 -0500

Nolts sells a "roll bar cap" (their ID # GFA5RBC). You use Tec-screws to
attach it to the pipe, with the plastic in between. A piece of light-weight
aluminum or steel C channel would do the same job, though it wouldn't have
the curve in it that the real product has.

--
Richard Robinson
www.nasw.org/users/rrobinson/
Hopestill Farm
www.hopestill.com



On Mon, 15 Nov 2010 14:31:30 -0500, Ryan Wood-Beauchamp wrote:
> We're assembling a 14' x 46' greenhouse and are going to put roll up sides
>on
> it.  We have 2 lengths of 1" galvanized piping that we intend to fasten to
> the edge of each side of plastic.  My question is how to attach the plastic
> to the pipe.  Any ideas?






Archive powered by MHonArc 2.6.24.

Top of Page