Skip to Content.
Sympa Menu

homestead - RE: [Homestead] Removing bar code stickers

homestead AT lists.ibiblio.org

Subject: Homestead mailing list

List archive

Chronological Thread  
  • From: "Warren F. Smith" <WarrenSmith AT PalmettoBuilders.net>
  • To: <homestead AT lists.ibiblio.org>
  • Subject: RE: [Homestead] Removing bar code stickers
  • Date: Wed, 12 Jan 2005 10:22:44 -0500

>>Thanks, Drew. HD paint gal recommended Goof Off or Lift Off.
>>I bought the
>>latter and it worked. I will wipe the whole wall of t&g
>>knotty pine down
>>with mineral spirits before I stain, but I am a bit concerned
>>that Lift Off
>>penetration may have left a residue that will affect the stain.

The mineral spirits are more likely to leave a residue than the lift off. If
you're trying to get the wood as clean as possible prior to stain with no
oily residues I'd go back to the lacquer thinner suggested earlier, in a
very well ventilated room, of course.

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 01/10/2005






Archive powered by MHonArc 2.6.24.

Top of Page