FreeTDS Development Group

[Will Saxon <WillS AT housing.ufl.edu>]

I did compile and install this, and using the same env settings I made and
installed DBI and DBD::Sybase (I want to connect to MS SQL 7). All the
DBD::Sybase tests fail, because of ctlib :/.

-Will

> -----Original Message-----
> From: Brian Bruns [mailto:camber AT ais.org]
> Sent: Friday, June 01, 2001 2:15 PM
> To: TDS Development Group
> Subject: [freetds] Re: problems with make check
> 
> 
> Ok, It's a libtool thing...Those symbols exist in 
> libtds.(a|so) but make
> check isn't finding it on you platform.  *sigh* 
> 
> Anybody with a solaris machine want to tackle this?
> 
> Will, everything should work fine, the tests are broken, not 
> the library.
> Do a make install and compile against SQSH if you really want 
> to make sure
> everything is fine.
> 
> 
> Brian
> 
> On Fri, 1 Jun 2001, Will Saxon wrote:
> 
> > I apologize if attachments are a no-no here, but I figured 
> it would be
> > smaller to send the output that way. 
> > 
> > Attached is a script-output containing a complete build 
> log, from configure
> > to make check. Also has my current environment settings.
> > 
> > -Will
> > 
> > > -----Original Message-----
> > > From: Brian Bruns [mailto:camber AT ais.org]
> > > Sent: Thursday, May 31, 2001 6:33 PM
> > > To: TDS Development Group
> > > Subject: [freetds] Re: problems with make check
> > > 
> > > 
> > > 
> > > Dang, I just sent the resonse to the wrong message...argh.
> > > 
> > > Can you send the output of the make command, and I'll see 
> > > what I can find
> > > 
> > > Brian
> > > 
> > > On Thu, 31 May 2001, Will Saxon wrote:
> > > 
> > > > Recompiling to use TDS 4.2 _does_ work. I am able to 
> execute the TDS
> > > > unittests correctly. Unfortunately, there is now a problem 
> > > with the next set
> > > > of tests (ctlib). About 20 symbols in libct.so are 
> > > 'undefined,' which is
> > > > really odd. 
> > > > 
> > > > I built from a clean source directory ('make distclean'ed) 
> > > and configured
> > > > with --with-tdsver=4.2
> > > > 
> > > > Thanks for the 4.2 suggestion.
> > > > 
> > > > -Will
> > > > 
> > > > > -----Original Message-----
> > > > > From: Brian Bruns [mailto:camber AT ais.org]
> > > > > Sent: Wednesday, May 30, 2001 10:35 PM
> > > > > To: TDS Development Group
> > > > > Subject: [freetds] Re: problems with make check
> > > > > 
> > > > > 
> > > > > Hi Will,
> > > > > 
> > > > > There may be a problem with running TDS 7 on big endian 
> > > > > machines.  I don't
> > > > > recall if it was ever corrected, but if you are willing 
> > > to give some
> > > > > input, we'll see if we can't get this straight.
> > > > > 
> > > > > Firstly, try configuring using './configure 
> > > > > --with-tdsver=4.2' and see if
> > > > > that works.
> > > > > 
> > > > > On Mon, 21 May 2001, Will Saxon wrote:
> > > > > 
> > > > > > Hello,
> > > > > > 
> > > > > > I realize this may have been covered in previous posts.. I 
> > > > > think this
> > > > > > situation is slightly different though.
> > > > > > 
> > > > > > I cannot get FreeTDS 'make check' to work properly on a 
> > > Sun Ultra-60
> > > > > > running Solaris 2.6. We have to use 2.6 because of another 
> > > > > application we
> > > > > > run that only works with 2.6.
> > > > > > 
> > > > > > I have a Microsoft SQL Server (v7.0) running on another 
> > > > > machine. I have
> > > > > > configured FreeTDS to build for TDS version 7.0. I have 
> > > > > specified the SQL
> > > > > > server name in /etc/hosts to avoid some of the other 
> > > > > problems I have read
> > > > > > about. FreeTDS compiles just fine, but when I 'make 
> > > check' I get the
> > > > > > following:
> > > > > > 
> > > > > > t000#.c: Test stuff
> > > > > > tds_connect() failed
> > > > > > try_tds_login() failed
> > > > > > FAIL: t000#
> > > > > > 
> > > > > > every single time. I have verified that the FreeTDS machine 
> > > > > is actually
> > > > > > attempting to connect to the SQL server - using a packet 
> > > > > sniffer I can see
> > > > > > packets coming in. The database is not in single user mode 
> > > > > or anything
> > > > > > like that. Note that I do not get the 'cannot assign 
> > > > > requested address'
> > > > > > thing.
> > > > > > 
> > > > > > One thing that I have NOT done is set any environment 
> > > > > variables. Since I
> > > > > > have not actually installed FreeTDS (I run make check 
> > > > > before installing) I
> > > > > > have not set $SYBASE or anything like that.
> > > > > > 
> > > > > > I have performed another build on a separate machine (x86 
> > > > > based FreeBSD
> > > > > > 4.3-STABLE) with no problems. I had everything configured 
> > > > > the exact same
> > > > > > way, with the same information in PWD and interfaces. It 
> > > > > worked the first
> > > > > > time, no problems at all. I have a few test scripts that I 
> > > > > written already
> > > > > > (using DBI and DBD::Sybase) and they all work just great. I 
> > > > > don't think I
> > > > > > am the problem with the situation.
> > > > > > 
> > > > > > One thing I just did was I compared logs from a successful 
> > > > > test on the
> > > > > > FreeBSD machine with an unsuccessful one on the Solaris 
> > > machine. The
> > > > > > initial packet sent is very similar in both tests, but not 
> > > > > exactly the
> > > > > > same. Several bytes seem to shifted or swapped. Is this 
> > > > > just a difference
> > > > > > between big and little endian bit ordering? Is this the 
> > > > > problem? I can
> > > > > > proved copies of the logs to anyone who wants to look.
> > > > > > 
> > > > > > I am really interested in using this software for this 
> > > > > project. It seems
> > > > > > to be the best way to do things. If only I could get it 
> > > to work! :).
> > > > > > 
> > > > > > -Will
> > > > > 
> 
> 
> ---
> You are currently subscribed to freetds as: [wills AT housing.ufl.edu]
> To unsubscribe, forward this message to 
> $subst('Email.Unsub')
>