baslinux AT lists.ibiblio.org
Subject: Baslinux mailing list
List archive
Re: [BL] Specific N.I.C. and sound drivers for BL3-50?
- From: baslinux AT lists.ibiblio.org
- To: baslinux AT lists.ibiblio.org
- Subject: Re: [BL] Specific N.I.C. and sound drivers for BL3-50?
- Date: Fri, 7 Dec 2007 00:22:24 +0000 (UTC)
2) The sound card is a built-in computer component which registers as
a 'Crystal PnP Audio System MPU-401 Compatible' in Windows 98.
If you get a list of messages [when you insmod cs4232[, you need some
other module before cs4232:
For my onboard (DELL) Crystal sound, which is cs4236 chip:
insmod soundcore
[For kernel 2.2.16 insmod soundlow]
insmod sound
insmod uart401
insmod ad1848
insmod cs4232 io=0x220 irq=5 dma=1 dma2=5 mpu_io=0x330
[The mpu_io is optional, only if you use external midi]
insmod opl3 io=0x388 [only if you want synthesized midi]
For kernel 2.2.26 without external or synthesized midi (use the BL timidity package instead):
insmod soundcore
insmod sound
insmod uart401
insmod ad1848
insmod cs4232 io=0x220 irq=5 dma=1 dma2=5
I made a script called cs-on with the above lines in it, put it on the path (/usr/local/bin would work) and chmod +x cs-on. If you plan to use sound a lot put the lines in rc instead to load sound modules at boot time.
Sindi
-
[BL] Specific N.I.C. and sound drivers for BL3-50?,
baslinux, 12/05/2007
-
Re: [BL] Specific N.I.C. and sound drivers for BL3-50?,
baslinux, 12/05/2007
- Re: [BL] Specific N.I.C. and sound drivers for BL3-50?, baslinux, 12/06/2007
- <Possible follow-up(s)>
-
Re: [BL] Specific N.I.C. and sound drivers for BL3-50?,
baslinux, 12/06/2007
- Re: [BL] Specific N.I.C. and sound drivers for BL3-50?, baslinux, 12/07/2007
-
Re: [BL] Specific N.I.C. and sound drivers for BL3-50?,
baslinux, 12/05/2007
Archive powered by MHonArc 2.6.24.