Skip to Content.
Sympa Menu

baslinux - Re: [BL] Can't get an EE PRO/100+ NIC to work

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Can't get an EE PRO/100+ NIC to work
  • Date: Sun, 11 Nov 2007 19:00:55 +1300

Message from Steven
===================
Mikael Bonnier wrote:
>
> "insmod eepro100" works. When I try udhcpc it warns
> about /dev/urandom missing and then does "Sending discover..."
> for an infinite number of times, or until i break it.
>
> What could I do to make my NIC work?

I suggest you assign an IP address directly.
For example:
--------------------------
ifconfig eth0 192.168.1.17
--------------------------
That assumes the other computer(s) on the network
also have address(es) in the 192.168.1.x range.
It also assumes there is no other computer using
that address.

Then you should be able to ping another computer
(which will confirm that your cables and other
hardware are OK).

Cheers,
Steven




Archive powered by MHonArc 2.6.24.

Top of Page