Skip to Content.
Sympa Menu

baslinux - [BL] Low-Profile Serial Cards

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Lee Forrest <lforrestster AT gmail.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: [BL] Low-Profile Serial Cards
  • Date: Sun, 31 Dec 2006 13:46:21 +0000

This is for the archives, in case anyone else faces the
same challenge.

I have a somewhat newer computer that uses low-profile PCI cards.
(You cannot use a standard card, even if you can make it fit,
because they require different voltages.) The serial cards for
these boxes need the 5.05+ serial driver, which in turn
requires a 2.4+ kernel. Setserial 2.17+ is required to configure
the card/port.

Mail me if you have any problems.

Lee

--
BasicLinux: Small is Beautiful
http://www.basiclinux.com.ru





Archive powered by MHonArc 2.6.24.

Top of Page