Skip to Content.
Sympa Menu

baslinux - [BL] BS3.21: Setting up a brand new Linksys EtherFast PCMCIA network card

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: TSketch2002 AT aol.com
  • To: baslinux AT lists.ibiblio.org
  • Subject: [BL] BS3.21: Setting up a brand new Linksys EtherFast PCMCIA network card
  • Date: Sun, 5 Sep 2004 19:40:04 EDT

I managed to figure out how to start the card up, and the indicator lights continuously blink, but I have no network connectivity. ifconfig shows nothing but the loopback, and during the cardmgr sequence, this is what I saw:
    eth0: pcnet_reset_8390() did not complete.
    pcnet_cs: sorry, the AX88190 chipset is not supported
    pcnet_cs: unable to read hardware net address for io base 0x300
 
Any ideas on where to go from here?
 



Archive powered by MHonArc 2.6.24.

Top of Page