Skip to Content.
Sympa Menu

baslinux - Re: [BL] Xvesa Problems

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Samual Acorn <sam_acorn AT yahoo.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Xvesa Problems
  • Date: Fri, 9 Apr 2004 16:09:02 -0700 (PDT)

humor me this then;

in dos : format a:/s (need blank floppy)

then boot from that floppy
once booted type ;

c:
cd \windows\command
mem

should look like your high memory is completely full
if it does -then- boot basic linux and try startx

may not work but humor me



--- Robert Steinmetz <rob AT steinmetznet.com> wrote:
> Samual Acorn wrote:
>
> >i got the same problem.
> >make sure EMM386 isnt loading, that was the cause
> for
> >me, but its best to boot DOS with nothing. (no
> >config.sys or autoexec.bat
> >
> >
> That doesn't seem to solve the problem in this case.
> I am booting
> Windows 98 into Safe Mode, Command Prompt only.
> Are you getting the Segmentation Faults?
>
> >i have no idea where the Xvesa program came from
> >or what version it is
> >
> >
> Thanks.
>
> >--- Robert Steinmetz <rob AT steinmetznet.com> wrote:
> >
> >
> >>I am attempting to get BL3 to run on an AST
> Ascentia
> >>950N notebook.
> >>Every time I starts or Run Xvesa I get a
> >>segmentation violation.
> >>
> >>Here are results of some tests;
> >>
> >>startx
> >>results in a black screen and the following
> errors;
> >>
> >>_X11TransSocketINETConnect: Can't connect: errorno
> =
> >>111
> >><repeat 18 times>
> >>MENU: cannot open display
> >>swm: cannot open display , giving up
> >>
> >>Xvesa -list modes
> >>
> >>VBE version 1.2 (Cirrus Logic GD-7543 VGA)
> >>DAC is switchable, controller is VGA compatible
> >>Total memory: 960 kilobytes
> >>
> >>Xvesa -verbose
> >>
> >>Results in a black Screen and the following output
> >>
> >>Mode Requested 640x480x4
> >> 0x00012: 640x480x4 Planar (4 planes) (no linear
> >>frame buffer)
> >> Static Color bpp 4 depth 4
> >>Mode Selected 640x480x4
> >>Previous modes: VBE 0x3 BIOS 0x3
> >>Enable Bios mode 0x12
> >>Segmentation Fault.
> >>
> >>Can someone tell me what version of Xvesa is in
> BL3,
> >>and where it came from?
> >>
> >>--
> >>Robert Steinmetz
> >>Principal
> >>Steinmetz & Associates
> >>
> >>
> >>_______________________________________________
> >>BasLinux mailing list
> >>BasLinux AT lists.ibiblio.org
> >>http://lists.ibiblio.org/mailman/listinfo/baslinux
> >>
> >>
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >Yahoo! Small Business $15K Web Design Giveaway
> >http://promotions.yahoo.com/design_giveaway/
> >_______________________________________________
> >BasLinux mailing list
> >BasLinux AT lists.ibiblio.org
> >http://lists.ibiblio.org/mailman/listinfo/baslinux
> >
> >
> >
> >
>
>
> --
> Robert Steinmetz
> Principal
> Steinmetz & Associates
>
>
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux


__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/




Archive powered by MHonArc 2.6.24.

Top of Page