Skip to Content.
Sympa Menu

sm-discuss - Re: [SM-Discuss] ipw2200

sm-discuss AT lists.ibiblio.org

Subject: Public SourceMage Discussion List

List archive

Chronological Thread  
  • From: Jason Flatt <jflatt AT sourcemage.org>
  • To: sm-discuss AT lists.ibiblio.org
  • Subject: Re: [SM-Discuss] ipw2200
  • Date: Mon, 13 Feb 2006 06:56:23 -0800

On Sunday 12 February 2006 06:21 pm, dave AT sourcemage.org wrote:
>
> Ok, So I've gone up to 2.6.15, and back to 2.6.13 (I need to use 13,
> because there's a reboot oops for my hardware at 2.6.15) and I've recast
> init so that I'm now running udev. No matter what combination of
> variables I use, the output of modprobe is always the same:
>
> ieee80211: 802.11 data/management/control stack, 1.1.9
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <jketreno AT linux.intel.com>
> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10
> ipw2200: Copyright(c) 2003-2005 Intel Corporation
> bus pci: add driver ipw2200
> pci: Matched Device 0000:06:06.0 with Driver ipw2200
> ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 18 (level, low) -> IRQ 18
> ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
> ipw2200: Error allocating IRQ 18
> ACPI: PCI interrupt for device 0000:06:06.0 disabled
> ipw2200: probe of 0000:06:06.0 failed with error -22
>
> I'm currently at ipw2200 1.0.10, udev 84, hotplug 2004_09_23, kernel
> 2.6.13. Any ideas would be greatly appreciated!
>
> --dave.

Umm, where is that IRQ being set? No system that I know of has any IRQ > 15.

I can't believe it is something that is being done automatically, so I would
look around in your various config files for an "18".

--
Jason Flatt
Source Mage GNU/Linux: Linux so advanced, it may as well be magic.
http://www.sourcemage.org/

Attachment: pgpQ8qodCRBVM.pgp
Description: PGP signature




Archive powered by MHonArc 2.6.24.

Top of Page