permaculture@lists.ibiblio.org
Subject: permaculture
List archive
- From: Claude Genest <genest@together.net>
- To: permaculture <permaculture@franklin.oit.unc.edu>
- Subject: Re: portable A-frame
- Date: Thu, 16 Aug 2001 12:52:00 -0400
I'd like to see that photo, mate ...
> From: "Naomi & Rick Coleman" <peds@tpg.com.au>
> Organization: P.E.D.S.
> Reply-To: "permaculture" <permaculture@franklin.oit.unc.edu>
> Date: Thu, 16 Aug 2001 21:38:05 +1000
> To: "permaculture" <permaculture@franklin.oit.unc.edu>
> Subject: Re: portable A-frame
>
> Hi Peta,
>
> Russ's design is a good one. Here is an adaptation that we use in third
> world countries where spirit levels (and even surfaces!!) are hard to
> find...
>
> Once you have made the A shape (and we use nails not butterfly bolts as
> these are readily available and cheap, but not as portable) you bang a nail
> in half way at the top point of the A.
>
> Then attach a string which has a rock or heavy object on the other end, and
> hang down (like a plumb line)
>
> To calibrate the A frame (ie to make sure it measure a contour accurately,)
> you place the A frame on any fairly even surface and mark the spot on the
> horizontal bar of the A where the string hangs down. Then carefully turn the
> A frame to the opposite side, using exactly the same marks on the ground to
> put the A onto, and again mark the spot where the string hangs down on the
> horizontal bar.
>
> You now have two marks, one on each side of the bar. The point exactly in
> the middle is the one to clearly label. Now when you use the A frame, you
> know that it is level when the string hangs down at this mark.
>
> This may sound complex but actually it is so much easier than conventional
> systems because you dont have to build a precisely measured, perfectly
> straight frame, you can use old scraps of timber and be totally unskilled at
> building and still have an accurate measure.
>
> I can email a photo of us using such a frame on the slopes of Ecuador if
> anyone is interested.
>
> Good luck,
>
> Naomi Coleman
> Southern Cross Permaculture Institute
> Victoria, Australia
> ----- Original Message -----
> From: "Peta Hudson" <petahud@ihug.co.nz>
> To: "permaculture" <permaculture@franklin.oit.unc.edu>
> Sent: Tuesday, 14 August 2001 20:01
> Subject: portable A-frame
>
>
>> Hi to everyone out there, I'm starting out on the road of teaching Pc
>> here in Dunedin (South Island of NZ) & have just joined this listserve.
>> I'm wondering if anyone can tell me how to make a lightweight, portable
>> A-frame for measuring contours? I seem to remember seeing one that
>> looked as though it even folded up. Cheers Peta
>>
>>
>> ---
>> You are currently subscribed to permaculture as: peds@tpg.com.au
>> To unsubscribe send a blank email to
> leave-permaculture@franklin.oit.unc.edu
>> Get the list FAQ at:
> http://www.ibiblio.org/ecolandtech/documents/permaculture.faq
>>
>
>
> ---
> You are currently subscribed to permaculture as: genest@together.net
> To unsubscribe send a blank email to leave-permaculture@franklin.oit.unc.edu
> Get the list FAQ at:
> http://www.ibiblio.org/ecolandtech/documents/permaculture.faq
-
portable A-frame,
Peta Hudson, 08/14/2001
- <Possible follow-up(s)>
- Re: portable A-frame, Pacific Edge Permaculture + Media, 08/14/2001
- Re: portable A-frame, Peta Hudson, 08/15/2001
- Re: portable A-frame, Claude Genest, 08/15/2001
- Re: portable A-frame, Naomi & Rick Coleman, 08/16/2001
- Re: portable A-frame, Claude Genest, 08/16/2001
- Re: portable A-frame, kahless, 08/16/2001
- Re: portable A-frame, Ute Bohnsack, 08/16/2001
- Re: portable A-frame, permed, 08/16/2001
- Re: portable A-frame, storm, 08/18/2001
Archive powered by MHonArc 2.6.24.