North American Fruit Explorers mailing list at ibiblio

["Thomas Olenio" <tolenio@sentex.net>]

Hi,

Pounding steel posts is easy with the proper tool.  It is a steel pipe  
that slides over the top of the steel post, about 3' long.  It is weighted  
and capped at one end.

Slip it over the steel post, lift drop, lift drop a few times and you are  
done.

A great tool.

Later,
Tom


On Tue, 14 Sep 2004 11:45:43 -0500, RW Spalinger <rwspal@earthlink.net>  
wrote:

> On Sep 13, 2004, at 11:31 PM, NAFEX List wrote:
>
> > ...Woven fence has some stability of its own, so no sag with that  
> > system.
> >
> > I have to admit that 10' t-posts would definitely do the job, but  
> > pounding them in sounds like a challenge.  Maybe dig a post hole and  
> > set with concrete?
>
> Each corner has 4 t-posts (to make a rounded corner) set in concrete.  
> The rest, about 12' apart are pounded into the ground with a t-post  
> driver. Indeed, we took many breaks in between driving the 10' posts  
> into the ground.
>
> Randall S.
>
>
> _______________________________________________
> nafex mailing list nafex@lists.ibiblio.org
>
> **YOU MUST BE SUBSCRIBED TO POST!**
> All other messages are discarded.
> No exceptions.  ----
> To subscribe or unsubscribe, go to the bottom of this page (also can be  
> used to change other email options):
> http://lists.ibiblio.org/mailman/listinfo/nafex
>
> File attachments are NOT stripped by this list
> TAKE STEPS TO PROTECT YOURSELF FROM COMPUTER VIRUSES!
> Please do not send binary files.
> Use plain text ONLY in emails!
>
> Message archives are here:
> https://lists.ibiblio.org/sympa/arc/nafex
>
> NAFEX web site:   http://www.nafex.org/



--
============