market-farming AT lists.ibiblio.org
Subject: Market Farming
List archive
- From: "Casey & Teena" <cm62547 AT windstream.net>
- To: "Market Farming" <market-farming AT lists.ibiblio.org>
- Subject: Re: [Market-farming] digging lots of small holes
- Date: Fri, 26 Mar 2010 18:23:53 -0500
you might consider this item, it would give you a 3" hole using a rechargable drill http://www.nextag.com/LEONARD-G-H-Bulb-583145833/prices-html
The planting bar is a one-inch thick, eight-inch wide, ten-inch deep wedge with a footrest on top for driving it into the soil and a long handle for manipulating it. It weighs about ten pounds. Part of the stress is that I often have to throw the thing into the soil to get it through the sod. (I could, and should, sharpen it, although there are many small stones in the soil that make that problematic as well.)
When planting with the bar, you get a wedge-shaped "hole". The tree roots go in, and you close the hole by moving the bar back a few inches, step it back into the soil, and rock it top and bottom to close the tree's hole.
What I am contemplating is instead drilling a 4-6" wide circular hole, about 10 inches deep.
--
Richard Robinson
http://www.nasw.org/users/rrobinson/
On Fri, 26 Mar 2010 13:04:01 -0500, Casey & Teena wrote:
Could you shed some light on the size of holes you are digging? My guess
would be that the reason the bar is causing so much trouble with your
shoulders is because of the weight of it. The powered post hole digger would
be even worse.
----- Original Message -----
From: "Richard Robinson" <rrobinson AT nasw.org>
To: "Market Farming" <market-farming AT lists.ibiblio.org>
Sent: Friday, March 26, 2010 10:23 AM
Subject: [Market-farming] digging lots of small holes
In a few weeks I will be planting about 300 Christmas trees. For the past 7_______________________________________________
years, I have been using a planting bar, essentially a wedge on a stick,
which is the common way to do this chore. But every year my arms and
shoulders are ruined for about a week after, and this year I am going into
the season with a damaged shoulder, and am hoping to avoid using the
planting bar. I have thought of a gas-powered post-hole digger, but have
never used one. For those of you with experience using them, how practical
this would be to use to dig 300 holes 10-12 inches deep in sandy loam? Is
it likely to be as onerous in its own way as using the planting bar?
Anybody have any other ideas for tools to do this?
--
Richard Robinson
http://www.nasw.org/users/rrobinson/
_______________________________________________
Market-farming mailing list
Market-farming AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/market-farming
Market-farming mailing list
Market-farming AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/market-farming
--------------------------------------------------------------------------------
_______________________________________________
Market-farming mailing list
Market-farming AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/market-farming
-
[Market-farming] digging lots of small holes,
Richard Robinson, 03/26/2010
-
Re: [Market-farming] digging lots of small holes,
Sean Albiston, 03/26/2010
- Re: [Market-farming] digging lots of small holes, Richard Robinson, 03/26/2010
-
Re: [Market-farming] digging lots of small holes,
Casey & Teena, 03/26/2010
-
Re: [Market-farming] digging lots of small holes,
Richard Robinson, 03/26/2010
- Re: [Market-farming] digging lots of small holes, Casey & Teena, 03/26/2010
-
Re: [Market-farming] digging lots of small holes,
Richard Robinson, 03/26/2010
- <Possible follow-up(s)>
- Re: [Market-farming] digging lots of small holes, mdbrabo, 03/26/2010
- Re: [Market-farming] digging lots of small holes, sunnfarm, 03/26/2010
-
Re: [Market-farming] digging lots of small holes,
Sean Albiston, 03/26/2010
Archive powered by MHonArc 2.6.24.