Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] High-tunnel

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: "breck" <bcarden AT breckinridgegroup.com>
  • To: "'Market Farming'" <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] High-tunnel
  • Date: Tue, 13 Jan 2009 14:16:51 -0500




Thanks for the replies; again I have been neglect in reading the fine print
(directions). If it ever gets warm and dry I will get painting.
Thanks,
Farmer Breck
Crestwood, KY 40014

-----Original Message-----
From: market-farming-bounces AT lists.ibiblio.org
[mailto:market-farming-bounces AT lists.ibiblio.org] On Behalf Of Sharon and
Steve
Sent: Tuesday, January 13, 2009 7:50 AM
To: Market Farming
Subject: Re: [Market-farming] High-tunnel




> Breck,
>
>
>
> I did. The manufacturer of the plastic recommended it. The only problem
> was that the pipes are galvanized and the paint does not stick for long
> without a special primer coat. It has flaked down in many wind storms.
> It
> does keep the temperature of the pipes down however. You would need a
> full
> coat of each, primer and top coat to do it right.
>
>
>
> Maury Sheets
llllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll
lllllllllllllllllllllllllllllllllllllllllllllllllllllllll

Down in the fine print of most poly warrenties is a requirement that all
surfaces in contact with their product have 2 coats of latex paint,
including all parts of the locking divice.
Never have seen it done completely yet.



MAsteveINE


_______________________________________________
Market-farming mailing list
Market-farming AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/market-farming






Archive powered by MHonArc 2.6.24.

Top of Page