market-farming AT lists.ibiblio.org
Subject: Market Farming
List archive
- From: "TxBeeFarmer" <txbeefarmer AT hotpop.com>
- To: "Market Farming" <market-farming AT lists.ibiblio.org>
- Subject: Re: [Market-farming] Bed Shaper
- Date: Sun, 11 Dec 2005 10:56:10 -0600
Oooops, I was thinking your tractor model was bigger, sorry. I think you can still use busters, but probably only two, and with more than one pass. You may not be able to make as wide of a bed either. The busters will have to be mounted on the draw bar at the same width as your wheels, so that's your limiting factor. For me, at $1,600, I'd do a lot of playing around before spending that kind of money. You could make up a rig with mostly used parts for a couple hundred bucks - probably much less.
TxBeeFarmer
Mark (West Texas - Zone 7b)
----- Original Message ----- From: "Kelly Saxer" <kellysaxer AT hotmail.com>
To: <market-farming AT lists.ibiblio.org>
Sent: Sunday, December 11, 2005 9:15 AM
Subject: Re: [Market-farming] Bed Shaper
Hi,
I am in the market for a bedshaper, however I have a small tractor - 22 HP
Kubota B7510. I've found that Buckeye Tractor Co. in Ohio sells a Jr.
Bedshaper for $1,214 that will make a 4" high bed and that the sales
associate insists my tractor can handle just fine. Also, I see that
www.marketfarm.com has a Lesche Bed Shaper for $1,610 that is supposedly
designed for tractors with approx. 25HP. Does anyone have experience with
either of these bedshapers or could anyone suggest another source for a
bedshaper that my small tractor could accomodate?
I appreciate any input you can offer me...
Thanks,
Kelly
Desert Roots Farm
Queen Creek, AZ
_______________________________________________
Market-farming mailing list
Market-farming AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/market-farming
Get the list FAQ at: http://www.marketfarming.net/mflistfaq.htm
-
Re: [Market-farming] Bed Shaper,
Kelly Saxer, 12/11/2005
-
Re: [Market-farming] Bed Shaper,
TxBeeFarmer, 12/11/2005
-
Re: [Market-farming] Bed Shaper,
Kelly Saxer, 12/11/2005
- Re: [Market-farming] Bed Shaper, Willie McKemie, 12/11/2005
-
Re: [Market-farming] Bed Shaper,
TxBeeFarmer, 12/12/2005
-
Re: [Market-farming] Bed Shaper,
Willie McKemie, 12/12/2005
- Re: [Market-farming] Bed Shaper, Kelly Saxer, 12/12/2005
-
[Market-farming] Yield Estimates,
Matt Cheselka, 12/12/2005
-
Re: [Market-farming] Yield Estimates,
TxBeeFarmer, 12/12/2005
- Re: [Market-farming] Yield Estimates, Lynn Wigglesworth, 12/12/2005
-
Re: [Market-farming] Yield Estimates,
David Inglis, 12/12/2005
- Re: [Market-farming] Yield Estimates, Tradingpost, 12/12/2005
-
Re: [Market-farming] Yield Estimates,
TxBeeFarmer, 12/12/2005
-
Re: [Market-farming] Bed Shaper,
Willie McKemie, 12/12/2005
-
Re: [Market-farming] Bed Shaper,
Kelly Saxer, 12/11/2005
-
Re: [Market-farming] Bed Shaper,
TxBeeFarmer, 12/11/2005
Archive powered by MHonArc 2.6.24.