Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] Roll-up sides on greenhouse

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: Allan Balliett <igg AT igg.com>
  • To: jeanne AT xtn.net, Market Farming <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] Roll-up sides on greenhouse
  • Date: Thu, 10 Apr 2003 07:11:17 -0400

Amy - Thanks for this info. Do you have a pipe on the bottom edge of your greenhouse plastic, or are you just 'pulling it up' to the strings on the board? Thanks _Allan

Hi,

We have a hoophouse which is 14 feet wide by 44 feet long. This is the 3rd season of use. About 2 1/2 feet up from the ground is a wooden one by two that runs the entire length of the greenhouse. At each metal hoop we have put a screw into the wood slat, this goes through the plastic from the outside, leaving a portion of the screw stick out so it will hold a piece of twine.
First the twine is tied around each metal hoop and left long enough to go around the rolled up plastic and hook onto the screw head. We have used this without any damage occurring to the plastic. Our house is double plastic down to the wood 1x2 so it can be inflated. I hope my description is understandable!!! It is a simple idea that has worked very well for us. It takes about 5 minutes to roll up and secure the two sides.
Amy K. Johnson wrote:




Archive powered by MHonArc 2.6.24.

Top of Page