market-farming AT lists.ibiblio.org
Subject: Market Farming
List archive
- From: "Judy & Ernie Duckworth" <jeduck AT midwest.net>
- To: "Market Farming" <market-farming AT lists.ibiblio.org>
- Subject: Re: [Market-farming] roll up sides on greenhouse
- Date: Wed, 9 Apr 2003 22:25:32 -0500
I did think about doing this but didn't. What I tried was 1" PVC pipe and
taping the plastic to the pipe but dampness loosened the tape. No good!!!!
----- Original Message -----
From: Larry Haftl <larry AT larryhaftl.com>
To: Market Farming <market-farming AT lists.ibiblio.org>
Sent: Wednesday, April 09, 2003 8:43 PM
Subject: Re: [Market-farming] roll up sides on greenhouse
> > The greenhouse plastic will work and hold up. At least they are on our
> > tunnels. We roll them up about 3' on one tunnel and only 2' on the
other.
> My
> > problem is finding a good cheap way of fastening them to the rod.
> > Ernie
>
> Have you thought of using "clips" made of PVC tubing with an inside
diameter
> slightly bigger than the diameter of the rod? I make the clips by cutting
4"
> long pieces form a 10' tube, cut a slot out lenghtwise, sand the edges
> smooth and use them to hold the plastic on my tunnel cloche. Get about 30
> from a $2 tube (plus labor).
>
> Larry Haftl
> larry AT larryhaftl.com
> http://LarryHaftl.com
> http://FukuokaFarmingOL.net
>
> _______________________________________________
> Market-farming mailing list
> Market-farming AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/market-farming
>
> Get the list FAQ at: http://www.marketfarming.net/mflistfaq.htm
>
-
Re: [Market-farming] roll up sides on greenhouse,
Bill Bradshaw, 04/09/2003
- <Possible follow-up(s)>
-
Re: [Market-farming] roll up sides on greenhouse,
Judy & Ernie Duckworth, 04/09/2003
-
Re: [Market-farming] roll up sides on greenhouse,
Larry Haftl, 04/09/2003
-
Re: [Market-farming] roll up sides on greenhouse,
Judy & Ernie Duckworth, 04/09/2003
- Re: [Market-farming] roll up sides on greenhouse, Larry Haftl, 04/10/2003
-
Re: [Market-farming] roll up sides on greenhouse,
Judy & Ernie Duckworth, 04/09/2003
-
Re: [Market-farming] roll up sides on greenhouse,
Larry Haftl, 04/09/2003
- RE: [Market-farming] roll up sides on greenhouse, Rick Hopkins, 04/09/2003
-
Re: [Market-farming] roll up sides on greenhouse,
Bill Shoemaker, 04/11/2003
-
[Market-farming] Newbie (again) with Cutflower Question,
Rose and Fred Lieberman, 04/11/2003
- Re: [Market-farming] Newbie (again) with Cutflower Question, Franklin W. Davis, 04/11/2003
-
[Market-farming] Newbie (again) with Cutflower Question,
Rose and Fred Lieberman, 04/11/2003
Archive powered by MHonArc 2.6.24.