Skip to Content.
Sympa Menu

baslinux - Re: [BL] unlocking ATA modem with BL?

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] unlocking ATA modem with BL?
  • Date: Thu, 26 Mar 2009 00:48:48 +0000 (UTC)


[6]Manually Unlocking the SPA-2102
1. Connect your computer directly to the INTERNET port of your SPA. Some
users may need a [13]crossover cable
[or a hub?]

[Insert network modules]

2. Set your machine's IP address to 67.133.234.53
+ In linux, you can do this by issuing ifconfig ethX:1
67.133.234.53, where X is your interface number.

[machine = linux computer, should it be ifconfig eth0 167.133.234.53? -
why the :1?.]

Still curious about this.


3. Install a webserver on your machine.
+ On linux, apache will work fine, but, remember to set the
mime-type to application/octet-stream.

[I forgot how to use busybox httpd. I keep getting 404s.]

Do I need an index.html with a link to the file I want to transfer in some directory indicated by /etc/httpd.conf ?

Can mini_httpd set mime-type to application/octet stream?
When I run mini_httpd in the directory containing this .cfg
and access 192.168.0.1 with lynx, a download transfers it as text/plain,
not application/octet stream.

When I downloaded a binary file, despite lynx listing it as text/plain,
the copy was identical to the original.

Sindi




Archive powered by MHonArc 2.6.24.

Top of Page