Skip to Content.
Sympa Menu

baslinux - Re: [BL] BL 3-50

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: <baslinux AT lists.ibiblio.org>
  • Subject: Re: [BL] BL 3-50
  • Date: Sun, 22 Apr 2007 13:41:25 +0200

Ron,
Thank you very much.
Your FS.img is intended for use in BL3.32? Could I install on hd using 50 Mb
FS.IMG in BL3.32 DOS version?
Bl3-50 Dos version with this image works. Would it be risky to install on
hd?
Otherwise I will turn to the 20Mb FS.img.
Regards.
Giuseppe


----- Original Message -----
From: <baslinux AT lists.ibiblio.org>
To: <baslinux AT lists.ibiblio.org>
Sent: Sunday, April 22, 2007 3:44 AM
Subject: Re: [BL] BL 3-50


> Hi Folks,
>
> On Sun, 22 Apr 2007 02:44:34 +0200, baslinux AT lists.ibiblio.org wrote:
>
> > Salve a tutti,
> > I have BL3-50 DOS version: I changed the 20 Mg Fs.img with the 50 Mg
> > Fs.img.
>
> If that 50 MB version of FS.IMG is from my website, then it was never
> intended for use with BL 3.50. I suggest that you stay with the FS.IMG
> that you downloaded for BL 3.50.
>
> > I would like to install to a linux partition: hda6. I also mke2fs
> > /dev/hda6.
> > I would like to mount at /hd but this directory does not exist:
> > "ls" showed there is directory /DOS. Is there anything wrong I made?
> > Thank you for help.
>
> You can make the directory. Type:
>
> mkdir /hd [enter]
>
>
> Regards,
> Ron
>
>
>
> Ron Clarke
> AUSREG Consultancy http://www.ausreg.com
> Tadpole Tunes http://www.tadpoletunes.com
> -- This mail was written by a user of the Arachne Browser -
http://arachne.cz/
>
> -----------------------
> BasicLinux mailing list
> -----------------------
> http://www.basiclinux.com.ru
> http://www.ibiblio.org/pub/linux/distributions/baslinux/
> ------------------------------------
> To exit, send subject=unsubscribe to
> baslinux-request AT lists.ibiblio.org





Archive powered by MHonArc 2.6.24.

Top of Page