Baslinux mailing list

[sindi keesan <keesan AT sdf.lonestar.org>]

Diamond Supra 56K faxmodem, pcmcia, works with kernel 2.2.16.
With kernel 2.2.26 (and matching modules) it loads only pcmcia_core then:
Bridge register mapping failed.  Check cb_mem_base setting  no bridges 
found.  i82365 Device or resource busy.

Since the 2.2.26 module for our ethernet card also did not work, I then 
checked the CF-adaptor with ide_cs, and it worked perfectly.

I checked the modem again (I had checked several times, in both slots, 
having rebooted at least once to try 2.2.16 and then 2.2.26 again).
It now worked and I am online.  I have dialed with it three times because 
it disconnects after a few minutes.

I think I should go back to kernel and modules 2.2.26.

I will try zgv uclibc-dynamic in BL3.40 with kernel 2.4.31 next but I 
cannot dial with it (don't have the modules loaded and don't know if it 
even takes those modules - slhc and ppp*).

keesan AT sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org