Baslinux mailing list

["Anthony Albert" <albert AT umpi.maine.edu>]

On 13 Jan 2006 at 9:36, Friedel Voelker wrote:

>Hi folks,
>
>did anyone tried to install BL on a PC/104 CPU board?
>
>I have one running Caldera DOS. Hardware: i386 compatible CPU @ 25MHz, 2 
>MB RAM, 2 MB Flash Disk (not IDE, access via int 13h).
>
>Do you see a chance to run this board with BL?
>
>Thanks and regards,
>Friedel

Don't see why you couldn't give it a try.  You may need to use BL1.x , 
though, since BL2 & 3 are focused on 486 class machines - i.e. with a 
math coprocessor.  You also may have to build a custom kernel, to work 
with the flash disk.  I'd check with the manufacturer - if they tell 
you that Linux will run on the device, then you should be able to get 
BL to work.

Anthony Albert
===========================================================
Anthony J. Albert                     albert AT umpi.maine.edu
Systems and Software Support Specialist          Postmaster
Computer Services - University of Maine, Presque Isle
        "This is only temporary, unless it works."
                        --- Red Green