Baslinux mailing list

["NRK" <nrk19 AT hotmail.com>]

Hello:

 

I am new to the list, but I am familiar with some of the topics that are discussed here on the forum, as I have reviewed the archives with interest.

I have installed BL3.3 on an old Ascentia lap-top with a 75 Mhz CPU, 32 MB of RAM and a small 524 MB hard drive. After achieving a bit of familiarity with the system, I have installed a network card 3c589c. Cardmgr has identified the card correctly. However, the drivers or module for this device have not loaded successfully. Can anyone tell me if the correct module for this card is located on BL3.3 and is so, what is the proper procedure for installing or binding the module to the card? It would truly be grand if I could put this old lap-top to work again. Thank you.

 

Nate