Skip to Content.
Sympa Menu

baslinux - Re: [BL] serial networking and telnet server - the solution

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: "Alejandro Lieber" <dos AT lieber.com.ar>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] serial networking and telnet server - the solution
  • Date: Wed, 20 Oct 2004 21:45:31

Sindi:

For DOS Telnet I use CONEX 7.1 in this 1 Mby 20Mhz 80286 hercules
video to conect daily to LYNX in a UNIX server in Baltimore.

Conex has macros, Tectronics graphic simulation, kermits, zmodem,
ymodem and xmodem

Just excellent.

On 20 Oct 04 at 0:23, sindi keesan wrote:

> I have not yet tried file transfer with send/receive over this cable.
> I expect it to take 30/0.2 times as long as ethernet (at 100Mbit)
> because I am at 10Kbit/sec. Fine for sending small files
> and also for using programs on #1 with #2, which can be a small RAMdisk
> BL2, or DOS, with any telnet program. (Have not tried DOS yet - there is
> CUTCP from Clarkson Univ that comes with Arachne, or Kermit telnet).
> I have to try file transfer too.
>


Read net news (USENET) with Arachne: http://www.lieber.com.ar/nnews.zip
Sans Serif fonts for MS-DOS at: http://www.lieber.com.ar/novafont.zip
Configurable dialing menu for several DOS internet programs at:
http://www.lieber.com.ar/dial_ip.zip

---------------------
Ing. Alejandro Lieber
Rosario Argentina
---------------------




  • Re: [BL] serial networking and telnet server - the solution, Alejandro Lieber, 10/21/2004

Archive powered by MHonArc 2.6.24.

Top of Page