baslinux AT lists.ibiblio.org
Subject: Baslinux mailing list
List archive
- From: "Paulo Orvalho" <paulo.orvalho AT pifertubos.pt>
- To: <baslinux AT lists.ibiblio.org>
- Subject: [BL] Strange lines after startx
- Date: Wed, 12 May 2004 20:09:10 +0100
Just tried that ( substitute xvesa ) and no deal....:(((( I got the same
problem......
Also i boot directly from the hardrive....
The lines are still not drawn.... I get instead of a line
AAAAAAAAAAAAAAAAAAAA...
> ----- Original Message -----
> From: "Sindi Keesan" <keesan AT iamjlamb.com>
> To: <baslinux AT lists.ibiblio.org>
> Sent: Wednesday, May 12, 2004 5:00 PM
> Subject: Re: [BL] Strange lines after startx
>
>
> > On Wed, 12 May 2004, Paulo Orvalho wrote:
> >
> > > BasicLinux 2.10 with the Xvesa setup of BasicLinux 3.20
> > >
> > > I tried it on 3 or 4 different computers and i get the same result....
> >
> > Steven can explain it to you better, but I think you are not supposed to
> > mix programs from these two versions of linux because they use different
> > basic libraries. Slackware through version 4 used libc5 and later
> > versions used libc6 also known as glibc. You can probably use the
> > programs from Slackware 7 in later versions of Slackware, or from
> > Slackware 3 with Slackware 4, but you cannot mix versions with different
> > libc numbers.
> >
> > BL2 is based on Slackware 7, BL3 on Slackware 3 with a kernel 2.2.16
> > (similar to that in BL2) that Steven compiled to be very small. You can
> > use Slackware 3 or 4 programs with BL3.
> >
> > Look for an Xvesa.tgz (xvesa.tgz) at delilinux that was compiled for
> > Slackware 7.1 and substitute that for the one from BL3, for use in BL2.
> >
> > Also you cannot use Xvesa after booting with MS-DOS 6.22. Try DR-DOS or
> > the DOS from Win9x. Or hit F5 while booting MS-DOS to bypass the
> > config.sys files. himem.sys interferes with Xvesa.
> >
> > > ----- Original Message -----
> > > From: "David Lane" <Jaypooh3 AT hotmail.com>
> > >
> > >
> > > > Hardware/version of Basic Linux please,
> > > >
> > > > David Lane
> >
> > David, you certainly asked a leading question!
> >
> > _______________________________________________
> > BasLinux mailing list
> > BasLinux AT lists.ibiblio.org
> > http://lists.ibiblio.org/mailman/listinfo/baslinux
>
-
[BL] Strange lines after startx,
Paulo Orvalho, 05/11/2004
- Re: [BL] Strange lines after startx, David Lane, 05/11/2004
- <Possible follow-up(s)>
-
[BL] Strange lines after startx,
Paulo Orvalho, 05/12/2004
-
Re: [BL] Strange lines after startx,
Sindi Keesan, 05/12/2004
- Re: [BL] Strange lines after startx, David Lane, 05/12/2004
- Re: [BL] Strange lines after startx, 3aoo-cvfd, 05/12/2004
-
Re: [BL] Strange lines after startx,
Sindi Keesan, 05/12/2004
-
[BL] Strange lines after startx,
Paulo Orvalho, 05/12/2004
-
Re: [BL] Strange lines after startx,
David Lane, 05/12/2004
-
Re: [BL] Strange lines after startx,
Paulo Orvalho, 05/12/2004
- Re: [BL] Strange lines after startx, 3aoo-cvfd, 05/12/2004
-
Re: [BL] Strange lines after startx,
Paulo Orvalho, 05/12/2004
-
Re: [BL] Strange lines after startx,
Sindi Keesan, 05/12/2004
-
Re: [BL] Strange lines after startx,
Paulo Orvalho, 05/12/2004
- Re: [BL] Strange lines after startx, Sindi Keesan, 05/12/2004
-
Re: [BL] Strange lines after startx,
Sindi Keesan, 05/12/2004
- Re: [BL] Strange lines after startx, Paulo Orvalho, 05/13/2004
-
Re: [BL] Strange lines after startx,
3aoo-cvfd, 05/12/2004
- Re: [BL] Strange lines after startx, Sindi Keesan, 05/12/2004
-
Re: [BL] Strange lines after startx,
Paulo Orvalho, 05/12/2004
-
Re: [BL] Strange lines after startx,
David Lane, 05/12/2004
Archive powered by MHonArc 2.6.24.