baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

[BL] Fw: cdrom - Am I the only one who has empty email problem ? I copied my question to the attached file.

From: "Woonsig Hong" <wshong AT ediagsolutions.com>
To: <baslinux AT lists.ibiblio.org>
Subject: [BL] Fw: cdrom - Am I the only one who has empty email problem ? I copied my question to the attached file.
Date: Sat, 20 Mar 2004 11:40:51 +0900

----- Original Message -----
From: "Woonsig Hong" <wshong AT ediagsolutions.com>
To: <baslinux AT lists.ibiblio.org>
Sent: Friday, March 19, 2004 8:45 PM
Subject: cdrom

> Hello.
>
> Can I mount a cdrom in BL2.1(ram drive version) ?
> I found following messages from dmesg.
> ----------------------------------------------------------------------------------
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hda: CRD-8322B, ATAPI CD/DVD-ROM drive <<<===============
> ide2: ports already in use, skipping probe
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> FDC 0 is a post-1991 82077
> Nand Flash disk driver, CompuLab
> Samsung 64 MB Nand flash detected.
> Partition check:
> nanda: nanda1
> NOR Flash (AMD) size: 2 MB total
> loop: loaded (max 8 devices)
> --------------------------------------------------------------------------------------
> And mount command gave an error as follows.
> ~<#>mount -t vfat /dev/hda /mnt
> mount: /dev/hda is not a valid block device
> ~<#>
> Thanks in advance.
>
> Regards,
> WoonsigHello.

Can I mount a cdrom in BL2.1(ram drive version) ?
I found following messages from dmesg.
----------------------------------------------------------------------------------
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: CRD-8322B, ATAPI CD/DVD-ROM drive <<<===============
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
FDC 0 is a post-1991 82077
Nand Flash disk driver, CompuLab
Samsung 64 MB Nand flash detected.
Partition check:
nanda: nanda1
NOR Flash (AMD) size: 2 MB total
loop: loaded (max 8 devices)
--------------------------------------------------------------------------------------
And mount command gave an error as follows.
~<#>mount -t vfat /dev/hda /mnt
mount: /dev/hda is not a valid block device
~<#>
Thanks in advance.

Regards,
Woonsig

[BL] Fw: cdrom - Am I the only one who has empty email problem ? I copied my question to the attached file., Woonsig Hong, 03/19/2004