Skip to Content.
Sympa Menu

baslinux - Re: [BL] BL on SATA drive

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] BL on SATA drive
  • Date: Thu, 25 Mar 2010 05:45:44 +1300

Sindi, I think putting in all 12 is a good idea, so that you don't
have to recompile the kernel for every different computer with SATA
you come across :)
And yay! A 2.6.21.7 kernel for BL!

-- Zarek Jenkinson
Blog: http://jenkinson-electronics.co.nz/zarek/wp
Twitter: http://www.twitter.com/zarekthenerd


On Thu, Mar 25, 2010 at 5:42 AM, <baslinux AT lists.ibiblio.org> wrote:
>
> Kernel 2.6 supports SATA more easily, but 2.4.27 and later will do so
> if you compile with IDE_SATA, SCSI_ATA and the driver for your individual
> chipset, which for my board is ICH6 series, using SATA_AHCI setting in the
> kernel configuration.
>
> I will use this superfast computer to compile a 2.6.21.7 kernel once
> I get BL2 working on it with 2.4.31 kernel.
>
> Would anyone like me to compile in all 12 SATA chipset drivers?
> Sindi
>
> -----------------------
> BasicLinux mailing list
> -----------------------
> http://www.basiclinux.com.ru
> http://www.ibiblio.org/pub/linux/distributions/baslinux/
> ------------------------------------
> To exit, send subject=unsubscribe to
> baslinux-request AT lists.ibiblio.org




Archive powered by MHonArc 2.6.24.

Top of Page