Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] Tractor list

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: "Cherry Tree Farms" <ctfarms AT helicon.net>
  • To: "Market Farming" <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] Tractor list
  • Date: Thu, 2 Mar 2006 21:06:14 -0500

I have had the best luck over at Ag Online by successful farming. This
link:
http://email.agriculture.com/cgi-bin1/DM/y/ezCh044Cp0TM0HLFg0A4
is for one discussion, it will get you in to explore the list. I have
gotten responses to my posted questions that have been very helpful, which
is more than I can say for yesterdays tractor as well.

Don't know my way around your Case to help your problem, though it sounds
like there is a restriction someplace; whether it is the set screw
calibration you ask about or once I had a gasket that didn't get a hole
punched properly at the factory that gave me fits while it blocked its port.

Good Luck,
Doyle

----- Original Message -----
From: <richard AT angelicorganics.com>
To: <market-farming AT lists.ibiblio.org>
Sent: Thursday, March 02, 2006 10:18 AM
Subject: [Market-farming] Tractor list


> What is the best email list or internet forum for mechanical issues?
>
> I post on Yesterday's Tractors sometimes, but I never get replies.
>
> this is the current problem =>
> http://www.ytmag.com/cgi-bin/viewit.cgi?bd=case&th=3110
>
>
> Richard Taylor
> Machine Department
> Angelic Organics
> 1547 Rockton Road
> Caledonia, IL
> 61011
>
> cell: 815 519 8774
>
>
> _______________________________________________
> Market-farming mailing list
> Market-farming AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/market-farming
>
> Get the list FAQ at: http://www.marketfarming.net/mflistfaq.htm
>






Archive powered by MHonArc 2.6.24.

Top of Page