freetds AT lists.ibiblio.org
Subject: FreeTDS Development Group
List archive
RE: [freetds] SQSH2.1 compiles, but hangs & quits @ logon [x-adr]
- From: Garrett Goebel <garrett AT scriptpro.com>
- To: 'FreeTDS Development Group' <freetds AT lists.ibiblio.org>
- Subject: RE: [freetds] SQSH2.1 compiles, but hangs & quits @ logon [x-adr]
- Date: Tue, 30 Dec 2003 06:19:38 -0600
Lowden, James K wrote:
>
> SQSH is written to Sybase's standard, not Microsoft's. I'm a little
> surprised it even links to FreeTDS with msdblib enabled.
>
>
> > I applied a patch credited to Gentoo to the src/config.h file
> > after my I ran configure:
>
> This is a sqsh patch, right? I don't see how it could do any
> harm, although
> you could probably do without it.
>
> > I went back and took the latest release version of freetds (from
> > August), and I get the same result.
>
> I run sqsh 2.1 routinely, as do others.
>
> Try:
>
> 1. Configure without --enable-msdblib.
> 2. Double check that sqsh is linking to the right FreeTDS
> (with ldd).
> 3. Post a log, so we can see where it's giving up.
> 4. Run sqsh under gdb, and post a backtrace if it catches a signal.
Has this made its way into the FreeTDS documentation? I recall having a
similar issue with 0.61, but as everything else I needed could be made to
work... I just stopped using SQSH.
Garrett
--
Garrett Goebel
IS Development Specialist
ScriptPro Direct: 913.403.5261
5828 Reeds Road Main: 913.384.1008
Mission, KS 66202 Fax: 913.384.2180
www.scriptpro.com garrett at scriptpro dot com
- RE: [freetds] SQSH2.1 compiles, but hangs & quits @ logon [x-adr], Garrett Goebel, 12/30/2003
Archive powered by MHonArc 2.6.24.