Skip to Content.
Sympa Menu

freetds - RE: [freetds] ./ltconfig[790]: There is not enough memory availab le now

freetds AT lists.ibiblio.org

Subject: FreeTDS Development Group

List archive

Chronological Thread  
  • From: "Lowden, James K" <LowdenJK AT bernstein.com>
  • To: "'freetds AT lists.ibiblio.org'" <freetds AT lists.ibiblio.org>
  • Subject: RE: [freetds] ./ltconfig[790]: There is not enough memory availab le now
  • Date: Mon, 16 Dec 2002 13:12:24 -0500

-----Original Message-----
From: Harrison, Bruce (CXO) [mailto:Bruce.Harrison AT hp.com]
Sent: December 13, 2002 6:22 PM

In an attempt to build the freetds (on two other, somewhat smaller
systems), I get the following error when I execute the ./configure script
and the script exits:
finding the maximum length of command line arguments... ./ltconfig[790]:
There is not enough memory available now.
configure: error: libtool configure failed


Bruce,

See this message and the related thread in the ML archive. HTH.

--jkl


> From: Strong, Mark [mailto:m.Strong AT tnsa.com.au]
> Sent: October 14, 2002 7:10 PM
> To: TDS Development Group
> Subject: [freetds] Re: TDSFREE on HPUX--- " There is not enough memory
> available now"
>
>
> Venkat,
> I had the same problem (not enough memory, during configure on
> HP-UX), I changed line 794 in ltconfig from $i != 18 to $i != 17, to
> remove one loop (probably not the ideal soultion, but it
> worked for me).
>
> I also used GNU Make, and it seemed to build ok, but I had
> other problems.
>
>
> Mark.


The information contained in this transmission may contain privileged and
confidential information and is intended only for the use of the person(s)
named above. If you are not the intended recipient, or an employee or agent
responsible for delivering this message to the intended recipient, any
review, dissemination, distribution or duplication of this communication is
strictly prohibited. If you are not the intended recipient, please contact
the sender immediately by reply e-mail and destroy all copies of the
original message. Please note that we do not accept account orders and/or
instructions by e-mail, and therefore will not be responsible for carrying
out such orders and/or instructions.





  • RE: [freetds] ./ltconfig[790]: There is not enough memory availab le now, Lowden, James K, 12/16/2002

Archive powered by MHonArc 2.6.24.

Top of Page