Skip to Content.
Sympa Menu

baslinux - Re: [BL] lilo.conf

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: <baslinux AT lists.ibiblio.org>
  • Subject: Re: [BL] lilo.conf
  • Date: Wed, 2 May 2007 01:04:13 +0200

Thank you Steven.
> Which /boot? The /boot on /dev/hda6 or the /boot on the
> Deli partition (or wherever you are executing lilo from)?

On hda6 there is: /boot/zimage and /boot/boot.b
Is it ok or should there be anything else?

> BL3 is not read-only

I changed "read-only" to "read-write" but
I receive the same message.

> It appears that lilo is looking in the local /root
> directory for zimage.

I just thought the same but I can't understand why.
Regards,
Giuseppe

----- Original Message -----
From: <baslinux AT lists.ibiblio.org>
To: <baslinux AT lists.ibiblio.org>
Sent: Wednesday, May 02, 2007 12:02 AM
Subject: Re: [BL] lilo.conf


> Message from Steven
> ===================
> Giuseppe wrote:
> >
> > I installed Bl3.40 to hd on hda6, zimage is on /boot.
>
> Which /boot? The /boot on /dev/hda6 or the /boot on the
> Deli partition (or wherever you are executing lilo from)?
>
> > image=/boot/zimage
> > label=BL3.40
> > root=/dev/hda6
> > read-only
>
> BL3 is not read-only
>
> > After lilo -v (or /sbin/lilo) I receive this message:
> > Fatal: open /boot/zimage: no such file or directory
>
> It appears that lilo is looking in the local /root
> directory for zimage.
>
> Cheers,
> Steven
>
> -----------------------
> BasicLinux mailing list
> -----------------------
> http://www.basiclinux.com.ru
> http://www.ibiblio.org/pub/linux/distributions/baslinux/
> ------------------------------------
> To exit, send subject=unsubscribe to
> baslinux-request AT lists.ibiblio.org





Archive powered by MHonArc 2.6.24.

Top of Page