Skip to Content.
Sympa Menu

market-farming - [Market-farming] Flail Mower

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: Peter Worsley <pwors AT svn.net>
  • To: Market Farming <market-farming AT lists.ibiblio.org>
  • Cc: Peter Worsley <pwors AT svn.net>
  • Subject: [Market-farming] Flail Mower
  • Date: Sun, 1 Apr 2012 16:18:35 -0700

Hi all-

I'm using a Gearmore (Made by Seppi) flail mower for mowing between rows in my orchard. There is a steel roller, about 5" in diameter, at the rear. The flails (knives) are forward of the roller. No matter how far backwards I position the mower (by adjusting the top link to make it longer) the knives still scrape the ground and dig in whenever the tractor goes over a small rise, I've always assumed that the mower should ride on the roller, following the contour of the surface I'm mowing. But I find that I can't mow with the rear hydraulics in "float" position- I have to raise the mower above the ground with the 3-point. This leaves it hanging suspended above the ground (the roller never touches the surface, and is useless as a guide).

Anybody have this problem, or a solution for it?

Thanks- Peter



  • [Market-farming] Flail Mower, Peter Worsley, 04/01/2012

Archive powered by MHonArc 2.6.24.

Top of Page