Skip to Content.
Sympa Menu

freetds - Re: [freetds] Trouble With Configure and Make on HP-UX 11.31 ia64

freetds AT lists.ibiblio.org

Subject: FreeTDS Development Group

List archive

Chronological Thread  
  • From: Wes Crews <wes.crews AT nexlevelit.com>
  • To: Robert Boehne <robertb AT trdlnk.com>, FreeTDS Development Group <freetds AT lists.ibiblio.org>
  • Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31 ia64
  • Date: Thu, 13 Jun 2013 15:19:16 +0000

Running the "make distclean" brought me back to an earlier error message:

ld: Unknown input file type: "../../dblib/.libs/libsybdb.so"

Wes

Wesley Crews
Senior Information Consultant
NexLevel Information Technology
Phone: 310-977-3609
http://www.nexlevelit.com
mailto:wes.crews AT nexlevelit.com
*********************************************************************************************************************************************************
 
This message and accompanying documents are covered by the Electronic
Communications Privacy Act,
18 U.S.C. §§ 2510-2521, and contain information intended for the specified
individual(s) only. This information is confidential.
If you are not the intended recipient or an agent responsible for delivering
it to the intended recipient, you are hereby
notified that you have received this document in error and that any review,
dissemination, copying, or the taking of any action based
on the contents of this information is strictly prohibited. If you have
received this communication in error,
please notify us immediately by e-mail, and delete the original message.

*********************************************************************************************************************************************************



-----Original Message-----
From: Robert Boehne [mailto:robertb AT trdlnk.com]
Sent: Thursday, June 13, 2013 8:15 AM
To: FreeTDS Development Group
Cc: Wes Crews
Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31 ia64

You probably have some left over stuff from the last build.

Do this:
make distclean

and then re-run configure.

HTH,

Robert

On 06/13/13 10:11, Wes Crews wrote:
> Thanks Frediano. I tried this and received a slightly different error:
>
> ld: Mismatched Data ABI. Expected EF_IA_64_ABI64 but found none in
> file terminal.o.
> Fatal error.
>
> Wes
>
> Wesley Crews
> Senior Information Consultant
> NexLevel Information Technology
> Phone: 310-977-3609
> http://www.nexlevelit.com
> mailto:wes.crews AT nexlevelit.com
> **********************************************************************
> **********************************************************************
> *************
>
> This message and accompanying documents are covered by the Electronic
> Communications Privacy Act,
> 18 U.S.C. §§ 2510-2521, and contain information intended for the specified
> individual(s) only. This information is confidential.
> If you are not the intended recipient or an agent responsible for
> delivering it to the intended recipient, you are hereby notified that
> you have received this document in error and that any review,
> dissemination, copying, or the taking of any action based on the contents
> of this information is strictly prohibited. If you have received this
> communication in error, please notify us immediately by e-mail, and delete
> the original message.
>
> **********************************************************************
> **********************************************************************
> *************
>
>
>
> -----Original Message-----
> From: freetds-bounces AT lists.ibiblio.org
> [mailto:freetds-bounces AT lists.ibiblio.org] On Behalf Of Frediano
> Ziglio
> Sent: Thursday, June 13, 2013 2:39 AM
> To: FreeTDS Development Group
> Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31
> ia64
>
> Hi,
> how did you set CFLAGS/LDFLAGS ? These flags should be redefined
> for both configure and make, this can be easily done passing these
> flags to configure, something like
>
> CFLAGS="+DD64" LDFLAGS="+DD64" ./confgure --whatever-argument-you-want
>
> Frediano
>
>
>
> 2013/6/13 Wes Crews <wes.crews AT nexlevelit.com>
>
>> The first error I sent was when the CPFLAGS and CFLAGS variables were
>> set to "+DD32". I tried again with them set to "+DD64" and the error
>> was as
>> follows:
>>
>> ld: Mismatched ABI for -lxnet, found /usr/lib/hpux32/libxnet.so
>> Fatal error.
>> *** Error exit code 1
>>
>> Stop.
>> *** Error exit code 1
>>
>> Stop.
>> *** Error exit code 1
>>
>> Stop.
>> *** Error exit code 1
>>
>> Wes
>>
>> Wesley Crews
>> Senior Information Consultant
>> NexLevel Information Technology
>> Phone: 310-977-3609
>> http://www.nexlevelit.com
>> mailto:wes.crews AT nexlevelit.com
>>
>> *********************************************************************
>> *
>> *********************************************************************
>> *
>> *************
>>
>> This message and accompanying documents are covered by the Electronic
>> Communications Privacy Act,
>> 18 U.S.C. §§ 2510-2521, and contain information intended for the
>> specified
>> individual(s) only. This information is confidential.
>> If you are not the intended recipient or an agent responsible for
>> delivering it to the intended recipient, you are hereby notified that
>> you have received this document in error and that any review,
>> dissemination, copying, or the taking of any action based on the
>> contents of this information is strictly prohibited. If you have
>> received this communication in error, please notify us immediately by
>> e-mail, and delete the original message.
>>
>>
>> *********************************************************************
>> *
>> *********************************************************************
>> *
>> *************
>>
>>
>>
>> -----Original Message-----
>> From: Wes Crews
>> Sent: Wednesday, June 12, 2013 5:27 PM
>> To: freetds AT lists.ibiblio.org
>> Subject: RE: [freetds] Trouble With Configure and Make on HP-UX 11.31
>> ia64
>>
>> Thanks for the quick reply. The full error I am getting is:
>>
>> ld: Unknown input file type: "../../dblib/.libs/libsybdb.so"
>> Fatal error.
>> *** Error exit code 1
>>
>> Stop.
>> *** Error exit code 1
>>
>> Stop.
>> *** Error exit code 1
>>
>> Stop.
>> *** Error exit code 1
>>
>> Wes
>>
>> Wesley Crews
>> Senior Information Consultant
>> NexLevel Information Technology
>> Phone: 310-977-3609
>> http://www.nexlevelit.com
>> mailto:wes.crews AT nexlevelit.com
>>
>> *********************************************************************
>> *
>> *********************************************************************
>> *
>> *************
>>
>> This message and accompanying documents are covered by the Electronic
>> Communications Privacy Act,
>> 18 U.S.C. §§ 2510-2521, and contain information intended for the
>> specified
>> individual(s) only. This information is confidential.
>> If you are not the intended recipient or an agent responsible for
>> delivering it to the intended recipient, you are hereby notified that
>> you have received this document in error and that any review,
>> dissemination, copying, or the taking of any action based on the
>> contents of this information is strictly prohibited. If you have
>> received this communication in error, please notify us immediately by
>> e-mail, and delete the original message.
>>
>>
>> *********************************************************************
>> *
>> *********************************************************************
>> *
>> *************
>>
>>
>>
>> -----Original Message-----
>> From: freetds-bounces AT lists.ibiblio.org [mailto:
>> freetds-bounces AT lists.ibiblio.org] On Behalf Of James K. Lowden
>> Sent: Wednesday, June 12, 2013 5:19 PM
>> To: freetds AT lists.ibiblio.org
>> Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31
>> ia64
>>
>> On Wed, 12 Jun 2013 17:19:34 +0000
>> Wes Crews <wes.crews AT nexlevelit.com> wrote:
>>
>>> am running into issues with the configuration and make files. If
>>> anyone has had luck with getting freeTDS built and deployed on HP-UX
>>> 11.31 ia64 I would appreciate some pointers for getting it done.
>> Should just be
>>
>> $ mkdir build
>> $ cd build && ../configure
>> $ make && make install
>>
>> What is the complete command line of the failed compile/link command,
>> and what is the error message?
>>
>> --jkl
>>
>> _______________________________________________
>> FreeTDS mailing list
>> FreeTDS AT lists.ibiblio.org
>> http://lists.ibiblio.org/mailman/listinfo/freetds
>> _______________________________________________
>> FreeTDS mailing list
>> FreeTDS AT lists.ibiblio.org
>> http://lists.ibiblio.org/mailman/listinfo/freetds
>>
> _______________________________________________
> FreeTDS mailing list
> FreeTDS AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/freetds
> _______________________________________________
> FreeTDS mailing list
> FreeTDS AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/freetds




Archive powered by MHonArc 2.6.24.

Top of Page