Skip to Content.
Sympa Menu

freetds - Re: [freetds] Trouble With Configure and Make on HP-UX 11.31 ia64

freetds AT lists.ibiblio.org

Subject: FreeTDS Development Group

List archive

Chronological Thread  
  • From: Wes Crews <wes.crews AT nexlevelit.com>
  • To: FreeTDS Development Group <freetds AT lists.ibiblio.org>
  • Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31 ia64
  • Date: Thu, 13 Jun 2013 15:11:24 +0000

Thanks Frediano. I tried this and received a slightly different error:

ld: Mismatched Data ABI. Expected EF_IA_64_ABI64 but found none in
file terminal.o.
Fatal error.

Wes

Wesley Crews
Senior Information Consultant
NexLevel Information Technology
Phone: 310-977-3609
http://www.nexlevelit.com
mailto:wes.crews AT nexlevelit.com
*********************************************************************************************************************************************************
 
This message and accompanying documents are covered by the Electronic
Communications Privacy Act,
18 U.S.C. §§ 2510-2521, and contain information intended for the specified
individual(s) only. This information is confidential.
If you are not the intended recipient or an agent responsible for delivering
it to the intended recipient, you are hereby
notified that you have received this document in error and that any review,
dissemination, copying, or the taking of any action based
on the contents of this information is strictly prohibited. If you have
received this communication in error,
please notify us immediately by e-mail, and delete the original message.

*********************************************************************************************************************************************************



-----Original Message-----
From: freetds-bounces AT lists.ibiblio.org
[mailto:freetds-bounces AT lists.ibiblio.org] On Behalf Of Frediano Ziglio
Sent: Thursday, June 13, 2013 2:39 AM
To: FreeTDS Development Group
Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31 ia64

Hi,
how did you set CFLAGS/LDFLAGS ? These flags should be redefined for both
configure and make, this can be easily done passing these flags to configure,
something like

CFLAGS="+DD64" LDFLAGS="+DD64" ./confgure --whatever-argument-you-want

Frediano



2013/6/13 Wes Crews <wes.crews AT nexlevelit.com>

> The first error I sent was when the CPFLAGS and CFLAGS variables were
> set to "+DD32". I tried again with them set to "+DD64" and the error
> was as
> follows:
>
> ld: Mismatched ABI for -lxnet, found /usr/lib/hpux32/libxnet.so
> Fatal error.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Wes
>
> Wesley Crews
> Senior Information Consultant
> NexLevel Information Technology
> Phone: 310-977-3609
> http://www.nexlevelit.com
> mailto:wes.crews AT nexlevelit.com
>
> **********************************************************************
> **********************************************************************
> *************
>
> This message and accompanying documents are covered by the Electronic
> Communications Privacy Act,
> 18 U.S.C. §§ 2510-2521, and contain information intended for the
> specified
> individual(s) only. This information is confidential.
> If you are not the intended recipient or an agent responsible for
> delivering it to the intended recipient, you are hereby notified that
> you have received this document in error and that any review,
> dissemination, copying, or the taking of any action based on the
> contents of this information is strictly prohibited. If you have
> received this communication in error, please notify us immediately by
> e-mail, and delete the original message.
>
>
> **********************************************************************
> **********************************************************************
> *************
>
>
>
> -----Original Message-----
> From: Wes Crews
> Sent: Wednesday, June 12, 2013 5:27 PM
> To: freetds AT lists.ibiblio.org
> Subject: RE: [freetds] Trouble With Configure and Make on HP-UX 11.31
> ia64
>
> Thanks for the quick reply. The full error I am getting is:
>
> ld: Unknown input file type: "../../dblib/.libs/libsybdb.so"
> Fatal error.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Wes
>
> Wesley Crews
> Senior Information Consultant
> NexLevel Information Technology
> Phone: 310-977-3609
> http://www.nexlevelit.com
> mailto:wes.crews AT nexlevelit.com
>
> **********************************************************************
> **********************************************************************
> *************
>
> This message and accompanying documents are covered by the Electronic
> Communications Privacy Act,
> 18 U.S.C. §§ 2510-2521, and contain information intended for the
> specified
> individual(s) only. This information is confidential.
> If you are not the intended recipient or an agent responsible for
> delivering it to the intended recipient, you are hereby notified that
> you have received this document in error and that any review,
> dissemination, copying, or the taking of any action based on the
> contents of this information is strictly prohibited. If you have
> received this communication in error, please notify us immediately by
> e-mail, and delete the original message.
>
>
> **********************************************************************
> **********************************************************************
> *************
>
>
>
> -----Original Message-----
> From: freetds-bounces AT lists.ibiblio.org [mailto:
> freetds-bounces AT lists.ibiblio.org] On Behalf Of James K. Lowden
> Sent: Wednesday, June 12, 2013 5:19 PM
> To: freetds AT lists.ibiblio.org
> Subject: Re: [freetds] Trouble With Configure and Make on HP-UX 11.31
> ia64
>
> On Wed, 12 Jun 2013 17:19:34 +0000
> Wes Crews <wes.crews AT nexlevelit.com> wrote:
>
> > am running into issues with the configuration and make files. If
> > anyone has had luck with getting freeTDS built and deployed on HP-UX
> > 11.31 ia64 I would appreciate some pointers for getting it done.
>
> Should just be
>
> $ mkdir build
> $ cd build && ../configure
> $ make && make install
>
> What is the complete command line of the failed compile/link command,
> and what is the error message?
>
> --jkl
>
> _______________________________________________
> FreeTDS mailing list
> FreeTDS AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/freetds
> _______________________________________________
> FreeTDS mailing list
> FreeTDS AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/freetds
>
_______________________________________________
FreeTDS mailing list
FreeTDS AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/freetds



Archive powered by MHonArc 2.6.24.

Top of Page