machinist@lists.ibiblio.org
Subject: Machinist
List archive
[machinist] Starret 199 machinist's level - how to calibrate it
- From: Lawrence London <lfljvenaura@gmail.com>
- To: machinist@lists.ibiblio.org
- Subject: [machinist] Starret 199 machinist's level - how to calibrate it
- Date: Fri, 1 Feb 2019 20:14:31 -0500
The
199 is a high dollar level, you did good. I have been looking for one
of those for a while and almost never see them under 300.
To
calibrate them find a flat surface and turn them end for end in the
same spot and adjust till the reading is the same each way. That is the
spec's from Starrett. For everyone's information the bottom of these
levels is ever so slightly concave from the factory so all 4 corners
must be on the surface of you will get a false reading.
--
- [machinist] Starret 199 machinist's level - how to calibrate it, Lawrence London, 02/01/2019
Archive powered by MHonArc 2.6.24.