Machinist

[Lawrence London <lfljvenaura@gmail.com>]

Joe at plaza machinery has lots if 5c and 4c collets.

1-1/4 cutters: bronze bushings (from McMaster) can be used over the arbor to increase the diameter, and other bushings nested over these to clamp the cutter. For single cutters, a shoulder can be cut on an oversize bushing (bronze busing, arbor spacer, drill bushing(very hard)).
--

Lawrence F. London, Jr.
lfljvenaura@gmail.com

https://sites.google.com/site/avantgeared