Skip to Content.
Sympa Menu

machinist - [machinist] Cutting internal oil grooves on a lathe using special tooling

machinist@lists.ibiblio.org

Subject: Machinist

List archive

Chronological Thread  
  • From: Lawrence London <lfljvenaura@gmail.com>
  • To: machinist@lists.ibiblio.org
  • Subject: [machinist] Cutting internal oil grooves on a lathe using special tooling
  • Date: Wed, 7 Mar 2018 06:53:13 -0500

Avant Geared


--



Archive powered by MHonArc 2.6.24.

Top of Page