machinist@lists.ibiblio.org
Subject: Machinist
List archive
- From: Lawrence London <lfljvenaura@gmail.com>
- To: machinist@lists.ibiblio.org
- Subject: [machinist] Manufacturing Calculators and Widgets
- Date: Mon, 5 Feb 2018 10:05:32 -0500
The bend allowance and bend deduction are two measures that relate the bent length of a piece of sheet metal to the flat length. The bend allowance describes the length of the |
After a bending operation, residual stresses will cause the sheet metal to spring back slightly. Due to this elastic recovery, it is necessary to over-bend the sheet a precise |
Calculate the required force to bend a piece of sheet metal using V-bending, a process in which a V-shaped punch presses the sheet into a V-die. The bending force can be |
Calculate the required force to bend a piece of sheet metal using wipe bending, also called edge bending. In this process, the sheet is held between a wipe die and pressure |
Calculate the required force to deep draw a piece of sheet metal based on the drawing ratio, sheet thickness, and the ultimate tensile strength of the material. The drawing |
- [machinist] Manufacturing Calculators and Widgets, Lawrence London, 02/05/2018
Archive powered by MHonArc 2.6.24.