Machinist

[Lawrence London <lfljvenaura@gmail.com>]

Viiala Hard Chrome Mill Files 2nd Cut
http://www.tognar.com/viiala-hard-chrome-mill-files-2nd-cut/

These quality files are hard chromed for longer life and better glide. They are 2nd cut files with 18 teeth/cm, and are well suited for all-around edge filing. With a Rockwell hardness of 67 they easily cut through edge material. Ski edges have a hardness of around 48, a file from your local hardware store will likely have a hardness of around 50. We offer them in 6, 8 and 10-inch lengths. If you want to keep it simple just get an 8-inch and you'll be covered. If you're looking for a slightly more aggressive file, take a look at the Viiala Hard Chrome 1st cut files.

• 2nd cut (18t/cm)
• 6, 8 or 10-inch
• Hard Chromed
• Sold each

http://www.tognar.com/viiala-hard-chrome-mill-files-1st-cut/

These quality files are hard chromed for longer life and better glide. They are 1st cut files with 15 teeth/cm, and are well suited for removing edge material quickly, it is best to use them on side edges only, they are generally too aggressive for base edges, unless you are dealing with skis that are "edge high". With a Rockwell hardness of 67 they easily cut through edge material. Ski edges have a hardness of around 48, a file from your local hardware store will likely have a hardness of around 50. We offer them in 8 and 10-inch lengths. If you want to keep it simple just get an 8-inch and you'll be covered. If you're looking for a slightly less aggressive file, take a look at the Viiala Hard Chrome 2nd cut files.

• 1st cut (15t/cm)
• 8 or 10-inch
• Hard Chromed
• Sold each

Tognar Toolworks

Toll Free 1-800-299-9904

International Calls  1-541-488-0816

Email info@tognar.com

 Mail and Returns

Tognar Toolworks

280 E Hersey

Unit 4

Ashland OR 97520

USA

http://www.tognar.com/ski-and-snowboard-tuning-tools/