FreeTDS Development Group

[Frediano Ziglio <freddy77 AT gmail.com>]

2013/12/10  <samuel.ferencik AT barclays.com>:
> NMakefile for Windows currently doesn't allow building ctlib. Here is a 
> patch for that. This is useful for users of DBD-Sybase (the CPAN module) 
> which has a dependency on ctlib.
>
> This doesn't affect any of the existing targets (except for "clean"), so is 
> backwards-compatible.
> Thanks,
> Sam
>
> --- 
> c:\temp\p4v\PRGDWM355382_qaperforce_1666\depot\QA\Toolbox\main.br\third_party_src\FreeTDS\src\Nmakefile#1
>                 2013-12-10 16:42:31.000000000 +-0100
> +++ c:\p4_ws\0toolbox\main.br\third_party_src\FreeTDS\src\Nmakefile         
>    2013-12-10 18:22:24.000000000 +-0100
> @@ -21,17 +21,19 @@
> !ENDIF
>  MKDIR = MD
> MV = move /Y
>  DBLIB_DIR        = src\dblib
> +CTLIB_DIR        = src\ctlib
> REPLACEMENTS_DIR = src\replacements
> TDS_DIR          = src\tds
> APPS_DIR         = src\apps
>  DBLIB_OUT        = $(DBLIB_DIR)\$(PLATFORM)\$(CONFIGURATION)
> +CTLIB_OUT        = $(CTLIB_DIR)\$(PLATFORM)\$(CONFIGURATION)
> REPLACEMENTS_OUT = $(REPLACEMENTS_DIR)\$(PLATFORM)\$(CONFIGURATION)
> TDS_OUT          = $(TDS_DIR)\$(PLATFORM)\$(CONFIGURATION)
> APPS_OUT         = $(APPS_DIR)\$(PLATFORM)\$(CONFIGURATION)
>  DBLIB_SRC =     $(DBLIB_DIR)\bcp.c \
>                                $(DBLIB_DIR)\dblib.c \
> @@ -32,18 +34,28 @@
> REPLACEMENTS_OUT = $(REPLACEMENTS_DIR)\$(PLATFORM)\$(CONFIGURATION)
> TDS_OUT          = $(TDS_DIR)\$(PLATFORM)\$(CONFIGURATION)
> APPS_OUT         = $(APPS_DIR)\$(PLATFORM)\$(CONFIGURATION)
>  DBLIB_SRC =     $(DBLIB_DIR)\bcp.c \
>                                $(DBLIB_DIR)\dblib.c \
> DBLIB_OBJ =     $(DBLIB_OUT)\bcp.obj \
>                                $(DBLIB_OUT)\dblib.obj \
>                                $(DBLIB_OUT)\dbopen.obj \
>                                $(DBLIB_OUT)\dbutil.obj \
>                                $(DBLIB_OUT)\rpc.obj \
>                                $(DBLIB_OUT)\xact.obj
> +
> +CTLIB_SRC =    $(CTLIB_DIR)\blk.c \
> +                             $(CTLIB_DIR)\cs.c \
> +                             $(CTLIB_DIR)\ct.c \
> +                             $(CTLIB_DIR)\ctutil.c
> +
> +CTLIB_OBJ =    $(CTLIB_OUT)\blk.obj \
> +                             $(CTLIB_OUT)\cs.obj \
> +                             $(CTLIB_OUT)\ct.obj \
> +                             $(CTLIB_OUT)\ctutil.obj
>  REPLACEMENTS_SRC = $(REPLACEMENTS_DIR)\asprintf.c \
>                                                
> $(REPLACEMENTS_DIR)\basename.c \
>                                                
> $(REPLACEMENTS_DIR)\fakepoll.c \
>                                                
> $(REPLACEMENTS_DIR)\gettimeofday.c \
>                                                $(REPLACEMENTS_DIR)\getopt.c 
> \
> @@ -49,18 +61,19 @@
>  REPLACEMENTS_SRC = $(REPLACEMENTS_DIR)\asprintf.c \
>                                                
> $(REPLACEMENTS_DIR)\basename.c \
>                                                
> $(REPLACEMENTS_DIR)\fakepoll.c \
>                                                
> $(REPLACEMENTS_DIR)\gettimeofday.c \
>                                                $(REPLACEMENTS_DIR)\getopt.c 
> \
>                                $(APPS_OUT)\datacopy.exe \
>                                $(APPS_OUT)\defncopy.exe \
>                                $(APPS_OUT)\freebcp.exe \
>                                $(APPS_OUT)\tsql.exe
>
>  db-lib: $(DBLIB_OUT)\db-lib.lib
> +libct: $(CTLIB_OUT)\libct.lib
>  apps: $(DBLIB_OUT)\db-lib.lib $(APPS_EXE)
> tsql: $(APPS_OUT)\tsql.exe
>  bsqldb: $(APPS_OUT)\bsqldb.exe
> help:
>                @echo targets: db-lib, apps, tsql, bsqldb
> @@ -155,29 +168,30 @@
>  apps: $(DBLIB_OUT)\db-lib.lib $(APPS_EXE)
> tsql: $(APPS_OUT)\tsql.exe
>  bsqldb: $(APPS_OUT)\bsqldb.exe
> help:
>                @echo targets: db-lib, apps, tsql, bsqldb
>                $(MAKE) -fNmakefile -nologo apps PLATFORM=win64 
> CONFIGURATION=release
>  clean:
>                @if "" equ "$(PLATFORM)"          PLATFORM not defined, see 
> comments in Nmakefile >&2 && exit 1
>                @if "" equ "$(CONFIGURATION)"             CONFIGURATION not 
> defined, see comments in Nmakefile >&2 && exit 1
>                if exist $(DBLIB_OUT)                     del /q 
> $(DBLIB_OUT)\*.obj  $(DBLIB_OUT)\*.lib
> +             if exist $(CTLIB_OUT)                     del /q 
> $(CTLIB_OUT)\*.obj  $(CTLIB_OUT)\*.lib
>                 if exist $(REPLACEMENTS_OUT)                del /q 
> $(REPLACEMENTS_OUT)\*.obj $(REPLACEMENTS_OUT)\*.lib
>                if exist $(TDS_OUT)                         del /q 
> $(TDS_OUT)\*.obj $(TDS_OUT)\*.lib
>                if exist $(APPS_OUT)                      del /q 
> $(APPS_OUT)\*.obj $(APPS_OUT)\*.exe
>  clean-app:
>                @if "" equ "$(PLATFORM)"          PLATFORM not defined, see 
> comments in Nmakefile >&2 && exit 1
>                @if "" equ "$(CONFIGURATION)"             CONFIGURATION not 
> defined, see comments in Nmakefile >&2 && exit 1
>                if exist $(APPS_OUT)                      del /q 
> $(APPS_OUT)\*.obj $(APPS_OUT)\*.exe
>  # Create output directories
> -$(DBLIB_OUT) $(REPLACEMENTS_OUT) $(TDS_OUT) $(APPS_OUT):
> +$(DBLIB_OUT) $(CTLIB_OUT) $(REPLACEMENTS_OUT) $(TDS_OUT) $(APPS_OUT):
>                @echo creating output directory for configuration: 
> "$(PLATFORM)|$(CONFIGURATION)"
>                @if "" equ "$(PLATFORM)"          PLATFORM not defined, see 
> comments in Nmakefile >&2 && exit 1
>                @if "" equ "$(CONFIGURATION)"             CONFIGURATION not 
> defined, see comments in Nmakefile >&2 && exit 1
>                $(MKDIR) $@
>  #
> @@ -218,18 +232,23 @@
>                @echo creating output directory for configuration: 
> "$(PLATFORM)|$(CONFIGURATION)"
>                @if "" equ "$(PLATFORM)"          PLATFORM not defined, see 
> comments in Nmakefile >&2 && exit 1
>                @if "" equ "$(CONFIGURATION)"             CONFIGURATION not 
> defined, see comments in Nmakefile >&2 && exit 1
>                $(MKDIR) $@
>  #
>                $(MV) $@.tmp $@
> !ENDIF
>  GENERATED_FILES = include\tdsver.h src\tds\tds_types.h \
>                src\tds\tds_willconvert.h src\tds\encodings.h 
> src\tds\num_limits.h
> +$(CTLIB_OUT)\libct.lib: $(GENERATED_FILES) $(CTLIB_OUT) $(CTLIB_OBJ) 
> $(REPLACEMENTS_OUT)\replacements.lib $(TDS_OUT)\tds.lib
> +             @echo building $@ >&2
> +             lib -nologo -out:"$@"     $(CTLIB_OBJ) \
> +                                                             
> $(REPLACEMENTS_OUT)\replacements.lib \
> +                                                             
> $(TDS_OUT)\tds.lib
> $(DBLIB_OUT)\db-lib.lib: $(GENERATED_FILES) $(DBLIB_OUT) $(DBLIB_OBJ) 
> $(REPLACEMENTS_OUT)\replacements.lib $(TDS_OUT)\tds.lib
>                @echo building $@ >&2
>                lib -nologo -out:"$@"     $(DBLIB_OBJ) \
>                                                                
> $(REPLACEMENTS_OUT)\replacements.lib \
>                                                                
> $(TDS_OUT)\tds.lib
> $(REPLACEMENTS_OUT)\replacements.lib: $(REPLACEMENTS_OUT) 
> $(REPLACEMENTS_OBJ)
> @@ -265,18 +284,39 @@
> $(DBLIB_OUT)\db-lib.lib: $(GENERATED_FILES) $(DBLIB_OUT) $(DBLIB_OBJ) 
> $(REPLACEMENTS_OUT)\replacements.lib $(TDS_OUT)\tds.lib
>                @echo building $@ >&2
>                lib -nologo -out:"$@"     $(DBLIB_OBJ) \
>                                                                
> $(REPLACEMENTS_OUT)\replacements.lib \
>                                                                
> $(TDS_OUT)\tds.lib
> $(REPLACEMENTS_OUT)\replacements.lib: $(REPLACEMENTS_OUT) 
> $(REPLACEMENTS_OBJ)
>                                                                
> -Fd"$(DBLIB_OUT)\vc80.pdb" \
>                $<
>  {$(DBLIB_DIR)}.c{$(DBLIB_DIR)\x64\release}.obj::
>                $(CC64) -c $(REL)              -Fo"$(DBLIB_OUT)\\" \
>                                                                
> -Fd"$(DBLIB_OUT)\vc80.pdb" \
> +             $<
> +
> +# ctlib
> +{$(CTLIB_DIR)\}.c{$(CTLIB_DIR)\win32\debug}.obj::
> +             $(CC32) -c $(DBG)            -Fo"$(CTLIB_OUT)\\" \
> +                                                             
> -Fd"$(CTLIB_OUT)\vc80.pdb" \
> +             $<
> +
> +{$(CTLIB_DIR)\}.c{$(CTLIB_DIR)\win32\release}.obj::
> +             $(CC32) -c $(REL)              -Fo"$(CTLIB_OUT)\\" \
> +                                                             
> -Fd"$(CTLIB_OUT)\vc80.pdb" \
> +             $<
> +
> +{$(CTLIB_DIR)\}.c{$(CTLIB_DIR)\x64\debug}.obj::
> +             $(CC64) -c $(DBG)            -Fo"$(CTLIB_OUT)\\" \
> +                                                             
> -Fd"$(CTLIB_OUT)\vc80.pdb" \
> +             $<
> +
> +{$(CTLIB_DIR)\}.c{$(CTLIB_DIR)\x64\release}.obj::
> +             $(CC64) -c $(REL)              -Fo"$(CTLIB_OUT)\\" \
> +                                                             
> -Fd"$(CTLIB_OUT)\vc80.pdb" \
>                $<
>  #
> # replacements
> #
> {$(REPLACEMENTS_DIR)}.c{$(REPLACEMENTS_DIR)\win32\debug}.obj::
>


On git HEAD we got support for cmake

Frediano