FreeTDS Development Group

["Rajesh Akolu" <rajesh.akolu AT ftindia.com>]

Hi,
Thanks for your quick response. 

We have installed FreeTDS 0.64 now. Which version of unixODBC you are
using. We are using unixODBC(2.2.12). 

Please refer to attached (our) trace file, search for
"[ODBC][19497][SQLExecDirect.c][233]" it gives following error 

"DIAG [42000] [FreeTDS][SQL Server]Procedure 'TestParm' expects
parameter '@OutParm2', which was not supplied." 

Please suggest.

Thanks & best regards,
Rajesh Akolu
Project Manager
Financial Technologies (India) Ltd.          
Board No: 022-26831022     Extn: 254
Fax: 022-26836999

rajesh.akolu AT ftindia.com 

www.ftindia.com 



Disclaimer:

The information in this E-mail (which includes any files transmitted
with it) is CONFIDENTIAL and may be legally PRIVILEGED. It is intended
solely for the addressee and access to this email by anyone else is
unauthorized. If you have received it in error, please destroy any
copies of this message, including any attachments, and delete it from
your system notifying the sender immediately. Any disclosure, copying,
distribution, dissemination, forwarding, printing or any action taken or
omitted to be taken in reliance on it or utilising the same for any
purpose other than what it is intended for, is prohibited and may be
unlawful.

-----Original Message-----
From: freetds-bounces AT lists.ibiblio.org
[mailto:freetds-bounces AT lists.ibiblio.org] On Behalf Of ZIGLIO,
Frediano, VF-IT
Sent: Tuesday, October 09, 2007 2:02 PM
To: FreeTDS Development Group
Subject: Re: [freetds] Not getting return value and
outputparameterfromstoredprocedure.

> Hi,
> In continuation with last conversation:
>
> Find attached for your reference:
> 1. Trace file (strace.txt)
> 2. Code which we are testing (code.cpp)
> 3. Stored procedure (SP_TestParm.txt) 
>
> We are not getting any error.
>
> We have set TDS Version = 8.0 and 7.0 in freeTDS.conf

This is the result I got from both 0.64 and CVS HEAD versions (using
protocol version 8.0)

Before result sets cleared: RetCode = 0, OutParm = 1.
After result sets drained: RetCode = 99, OutParm = 88.

which seems correct to me...
You are surely not using version 0.62... strace report clock_gettime
which is quite new in FreeTDS code.

I noted also that you have some strange lines in your trace

open("/usr/X11R6/lib/tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
open("/usr/X11R6/lib/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("-pthread/tls/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
open("-pthread/tls/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
open("-pthread/tls/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
open("-pthread/tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("-pthread/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
open("-pthread/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("-pthread/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("-pthread/libm.so.6", O_RDONLY)    = -1 ENOENT (No such file or
directory)
open("/usr/lib/tls/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
open("/usr/lib/tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/usr/lib/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/usr/lib/libm.so.6", O_RDONLY)    = -1 ENOENT (No such file or
directory)
open("/usr/local/lib/tls/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/usr/local/lib/tls/i686/sse2", 0xbfebde58) = -1 ENOENT (No such
file or directory)
open("/usr/local/lib/tls/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
stat64("/usr/local/lib/tls/i686", 0xbfebde58) = -1 ENOENT (No such file
or directory)
open("/usr/local/lib/tls/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
stat64("/usr/local/lib/tls/sse2", 0xbfebde58) = -1 ENOENT (No such file
or directory)
open("/usr/local/lib/tls/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
stat64("/usr/local/lib/tls", 0xbfebde58) = -1 ENOENT (No such file or
directory)
open("/usr/local/lib/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/usr/local/lib/i686/sse2", 0xbfebde58) = -1 ENOENT (No such file
or directory)
open("/usr/local/lib/i686/libm.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
stat64("/usr/local/lib/i686", 0xbfebde58) = -1 ENOENT (No such file or
directory)
open("/usr/local/lib/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
stat64("/usr/local/lib/sse2", 0xbfebde58) = -1 ENOENT (No such file or
directory)
open("/usr/local/lib/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
stat64("/usr/local/lib", {st_mode=S_IFDIR|0755, st_size=12288, ...}) = 0
open("tls/i686/sse2/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("tls/i686/libm.so.6", O_RDONLY)    = -1 ENOENT (No such file or
directory)
open("tls/sse2/libm.so.6", O_RDONLY)    = -1 ENOENT (No such file or
directory)
open("tls/libm.so.6", O_RDONLY)         = -1 ENOENT (No such file or
directory)
open("i686/sse2/libm.so.6", O_RDONLY)   = -1 ENOENT (No such file or
directory)
open("i686/libm.so.6", O_RDONLY)        = -1 ENOENT (No such file or
directory)
open("sse2/libm.so.6", O_RDONLY)        = -1 ENOENT (No such file or
directory)
open("libm.so.6", O_RDONLY)             = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=106299, ...}) = 0
old_mmap(NULL, 106299, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f9b000
close(3)                                = 0
open("/lib/tls/libm.so.6", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\323z"...,
512) = 512

note that the system is looking at "-pthread" directory and currect
directory for libraries... did you set some LD_* environment or used
some strange link options??

This is my sql trace (using 0.64 version)

[ODBC][21084][__handles.c][444]
               Exit:[SQL_SUCCESS]
                       Environment = 0x9fe1008
[ODBC][21084][SQLSetEnvAttr.c][182]
               Entry:
                       Environment = 0x9fe1008
                       Attribute = SQL_ATTR_ODBC_VERSION
                       Value = 0x3
                       StrLen = -6
[ODBC][21084][SQLSetEnvAttr.c][349]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLAllocHandle.c][345]
               Entry:
                       Handle Type = 2
                       Input Handle = 0x9fe1008
[ODBC][21084][SQLAllocHandle.c][463]
               Exit:[SQL_SUCCESS]
                       Output Handle = 0x9fe15e0
[ODBC][21084][SQLConnect.c][3549]
               Entry:
                       Connection = 0x9fe15e0
                       Server Name = [fxs][length = 3 (SQL_NTS)]
                       User Name = [sa][length = 2 (SQL_NTS)]
                       Authentication = [****************][length = 16
(SQL_NTS)]
               UNICODE Using encoding ASCII 'ISO8859-1' and UNICODE
'UCS-2LE'

[ODBC][21084][SQLConnect.c][4123]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLAllocHandle.c][510]
               Entry:
                       Handle Type = 3
                       Input Handle = 0x9fe15e0
[ODBC][21084][SQLAllocHandle.c][872]
               Exit:[SQL_SUCCESS]
                       Output Handle = 0xa028948
[ODBC][21084][SQLBindParameter.c][193]
               Entry:
                       Statement = 0xa028948
                       Param Number = 1
                       Param Type = 4
                       C Type = -15 SQL_C_SSHORT
                       SQL Type = 4 SQL_INTEGER
                       Col Def = 0
                       Scale = 0
                       Rgb Value = 0xbfda86d2
                       Value Max = 0
                       StrLen Or Ind = 0xbfda86cc
[ODBC][21084][SQLBindParameter.c][339]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLBindParameter.c][193]
               Entry:
                       Statement = 0xa028948
                       Param Number = 2
                       Param Type = 4
                       C Type = -15 SQL_C_SSHORT
                       SQL Type = 4 SQL_INTEGER
                       Col Def = 0
                       Scale = 0
                       Rgb Value = 0xbfda86d0
                       Value Max = 0
                       StrLen Or Ind = 0xbfda86c8
[ODBC][21084][SQLBindParameter.c][339]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLExecDirect.c][233]
               Entry:
                       Statement = 0xa028948
                       SQL = [{? = call TestParm(?)}][length = 22
(SQL_NTS)]
[ODBC][21084][SQLExecDirect.c][496]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLMoreResults.c][155]
               Entry:
                       Statement = 0xa028948
[ODBC][21084][SQLMoreResults.c][311]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLMoreResults.c][155]
               Entry:
                       Statement = 0xa028948
[ODBC][21084][SQLMoreResults.c][311]
               Exit:[SQL_NO_DATA]
[ODBC][21084][SQLFreeHandle.c][365]
               Entry:
                       Handle Type = 3
                       Input Handle = 0xa028948
[ODBC][21084][SQLFreeHandle.c][462]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLDisconnect.c][204]
               Entry:
                       Connection = 0x9fe15e0
[ODBC][21084][SQLDisconnect.c][341]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLFreeHandle.c][268]
               Entry:
                       Handle Type = 2
                       Input Handle = 0x9fe15e0
[ODBC][21084][SQLFreeHandle.c][317]
               Exit:[SQL_SUCCESS]
[ODBC][21084][SQLFreeHandle.c][203]
               Entry:
                       Handle Type = 1
                       Input Handle = 0x9fe1008

> Thanks & best regards,
>
> Rajesh Akolu
> Project Manager
....

bye
 freddy77

> > 
> > Hi,
> > 
> > We are using FreeTDS 0.65 (TDS version 8.0) and unixODBC 
> > 2.2.12 on RH Linux 3.4.6. We are connecting to Microsoft SQL 
> > Server 2000 from Linux. I am using C++ on Linux. 
> > 
>
> Is ebay selling time machine ??
> I didn't note we release 0.65 :)
> Don't mind, just kidding... I think you are using a snapshot which
> report 0.65.
>
> > 
> > 
> > Requirement: To get return value and output parameter after 
> > calling a stored procedure.
> > 
> > 
> > 
> > We are calling Stored Procedure (SP) with input and output 
> > parameter and we are also expecting return value as well. 
> > 
> > 
> > 
> > We are calling stored procedure as follows:
> > 
> > 
> > 
> > {? = CALL stp_returnRow(?, ?, ?)}
> > 
> > 
>
> MMmm... a unixODBC trace would help. We support this type of 
> call so it
> should works... what's the problem?? Aren't datas readed correct? Does
> execute report an error/warning??
>
> > 
> > In above case we are expecting both return value and output 
> > parameter. The first parameter is input and 2nd and 3rd 
> > parameter is output parameter.
> > 
> > 
>
> Remember that ODBC count also the result so you have 4 parameters.
>
> > 
> > We have written the above query to unixODBC and we were 
> > informed that this problem is not in there Perview. This is 
> > for your information.
> > 
> > 
> > 
> > Please suggest or give us solution if possible.
> > 
> > 
> > 
> > Thanks & best regards,
> > 
> > Rajesh Akolu
> > 
_______________________________________________
FreeTDS mailing list
FreeTDS AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/freetds

[ODBC][19497][__handles.c][444]
                Exit:[SQL_SUCCESS]
                        Environment = 0x89b1008
[ODBC][19497][SQLSetEnvAttr.c][182]
		Entry:            
			Environment = 0x89b1008            
			Attribute = SQL_ATTR_ODBC_VERSION            
			Value = 0x3            
			StrLen = -6
[ODBC][19497][SQLSetEnvAttr.c][349]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLAllocHandle.c][345]
                Entry:
                        Handle Type = 2
                        Input Handle = 0x89b1008
[ODBC][19497][SQLAllocHandle.c][463]
                Exit:[SQL_SUCCESS]
                        Output Handle = 0x89b15e0
[ODBC][19497][SQLConnect.c][3549]
		Entry:            
			Connection = 0x89b15e0            
			Server Name = [freeDSN][length = 7 (SQL_NTS)]            
			User Name = [odin][length = 4 (SQL_NTS)]            
			Authentication = [****][length = 4 (SQL_NTS)]
                UNICODE Using encoding ASCII 'ISO8859-1' and UNICODE 'UCS-2LE'

[ODBC][19497][SQLConnect.c][4123]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLAllocHandle.c][510]
                Entry:
                        Handle Type = 3
                        Input Handle = 0x89b15e0
[ODBC][19497][SQLAllocHandle.c][872]
                Exit:[SQL_SUCCESS]
                        Output Handle = 0x89c5d28
[ODBC][19497][SQLBindParameter.c][193]
		Entry:            
			Statement = 0x89c5d28            
			Param Number = 1            
			Param Type = 4            
			C Type = -15 SQL_C_SSHORT            
			SQL Type = 4 SQL_INTEGER            
			Col Def = 0            
			Scale = 0            
			Rgb Value = 0xbff29014            
			Value Max = 0            
			StrLen Or Ind = 0xbff2900c
[ODBC][19497][SQLBindParameter.c][339]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLBindParameter.c][193]
		Entry:            
			Statement = 0x89c5d28            
			Param Number = 2            
			Param Type = 4            
			C Type = -15 SQL_C_SSHORT            
			SQL Type = 4 SQL_INTEGER            
			Col Def = 0            
			Scale = 0            
			Rgb Value = 0xbff29012            
			Value Max = 0            
			StrLen Or Ind = 0xbff29008
[ODBC][19497][SQLBindParameter.c][339]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLExecDirect.c][233]
		Entry:            
			Statement = 0x89c5d28            
			SQL = [{? = call TestParm(?)}][length = 22 (SQL_NTS)]
[ODBC][19497][SQLExecDirect.c][496]
                Exit:[SQL_ERROR]
                DIAG [42000] [FreeTDS][SQL Server]Procedure 'TestParm' 
expects parameter '@OutParm2', which was not supplied.

[ODBC][19497][SQLMoreResults.c][155]
		Entry:            
			Statement = 0x89c5d28
[ODBC][19497][SQLMoreResults.c][176]
                Exit:[SQL_NO_DATA]
[ODBC][19497][SQLFreeHandle.c][365]
                Entry:
                        Handle Type = 3
                        Input Handle = 0x89c5d28
[ODBC][19497][SQLFreeHandle.c][462]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLDisconnect.c][204]
		Entry:            
			Connection = 0x89b15e0
[ODBC][19497][SQLDisconnect.c][341]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLFreeHandle.c][268]
                Entry:
                        Handle Type = 2
                        Input Handle = 0x89b15e0
[ODBC][19497][SQLFreeHandle.c][317]
                Exit:[SQL_SUCCESS]
[ODBC][19497][SQLFreeHandle.c][203]
                Entry:
                        Handle Type = 1
                        Input Handle = 0x89b1008