FreeTDS Development Group

["ZIGLIO, Frediano, VF-IT" <Frediano.Ziglio AT vodafone.com>]

> >>>> Hi,
> >>>>   finally I got some time to work seriously on FreeTDS.
> >>>>
> >>>> Currently there is no open bug at project site. 
> >>> Hi, I just wanted to make you lie :)
> >>> I have generated a full tds logfile for the problem I'm having,
> >>> however this time I didn't get a freeze but an error.
> >>> (see tracker)
> >>>
> >>> Christophe
> >>>
> >> Finally I got the full log !!!
> >>
> >> And I got it !!!
> >>
> >> >From log:
> >>
> >> ...
> >>
> >> net.c:673:Sending packet
> >> 0000 06 01 00 08 00 00 00 00-                        |........|
> >>
> >> ...
> >>
> >> net.c:446:Received header
> >> 0000 04 03 01 fc 00 00 00 00-                        |........|
> >>
> >> ...
> >>
> >> net.c:446:Received header
> >> 0000 04 01 00 11 00 00 00 00-                        |........|
> >>
> >> net.c:542:Received packet
> >> 0000 fd 30 00 02 00 14 47 00-00                      |.0....G. .|
> >>
> >>
> >>
> >> The key is
> >>
> >> net.c:446:Received header
> >> 0000 04 03 01 fc 00 00 00 00-                        |........|
> >>
> >> note that status is 3 (second byte)... never seen before in 
> >> all my FreeTDS works (that is in 5 years !!!)
> >> This means: "ok, these are still results but I received 
> >> acknowledge so this is the last"... so the right behavior is 
> >> reset state to idle or pending without data... !!!
> >> The implementation problem is that lower level (network level 
> >> in libTDS) should communicate to token level to handle this case...
> >> I find this stuff fantastic. Assume that you are getting a 
> >> very long column (say a 500kb image) the server just stop 
> >> sending image setting correctly state. I don't understand why 
> >> newer server do not seem to use this feature...
> >>
> > 
> > Try applying this patch. If you are not able to apply it 
> tell me and I'll send a new package.
> 
> Hi!
> I've applied the patch, it still fails,  here is the new log:
> 
> http://ccomb.free.fr/freetds.log2
> 

I didn't have much time to narrow down the problem... I tried a lot of
combination, capability, etc but I didn't manage to reproduce the
problem. ASE never return state 03 !! Also from documentation should
return 3 but without the small packet with DONE inside... it seems
related to your ASA version :(

freddy77