FreeTDS Development Group

["Frank, Ryan W" <ryan.w.frank AT bankofamerica.com>]

Ok I did some more playing around... I have been able to issue the
select statement using bsqldb from the compiled FreeTDS...
 
So, I am assuming it is working just fine, it ran REALLY fast:
 
Retrieving return status... none
19799 rows affected
Retrieving output parameters... none
bsqldb:615: dbresults() returned NO_MORE_RESULTS (2):
bsqldb:212: Query:
 
real    0m0.79s
user    0m0.68s
sys     0m0.09s
 
Pretty darn good as far as I am concerned... Any ideas as to where my
PHP/FreeTDS configuration is messed?
 
-Ryan 
 
 

________________________________

From: Frank, Ryan W 
Sent: Thursday, August 10, 2006 11:49 AM
To: 'FreeTDS AT lists.ibiblio.org'
Subject: FreeTDS with PHP On Solaris


Hello all!
 
I am having trouble with my installation of FreeTDS running on my
Solaris box.  Here is my configuration:
 
Microsoft SQL: Version Microsoft SQL Server Release 8.0
 
Solaris 9
Kernel: Generic_117171-07
 
FreeTDS 0.64
    CONFIGURE: configure --prefix=/usr/local/freetds --enable-msdblib
--enable-sybase-compat --with-openssl=/usr/local/ssl
 
PHP 5.0.4
    CONFIGURE: configure --prefix=/usr/local/php-5.0.4
--with-sybase=/usr/local/freetds
--with-apache=/export/build/apache_1.3.27 --with-openssl=/usr/local/ssl
--with-mysql=/usr/local/mysql
 
Apache 1.3.27
    CONFIGURE: configure --prefix=/usr/local/apache
--activate-module=src/modules/php5/libphp5.a
 
I have created my /usr/local/freetds/interfaces file, and set my
environment variables... I can run TSQL tests and get the 1> prompt
every time.  I can write basic PHP queries to get data and display it 
 
EXAMPLE (Working):
 
$sql = "SELECT NewHireNBID, ConfUserFName, ConfUserLName from NewHire
WHERE RequestID = '123386'"
 
print("NOTE: executing $sql<br>");
$result=mssql_query($sql, $con);
print("NOTE: done executing $sql<br>");
 
As you can see I am not doing anything with the data yet, just simply
printing when I begin and printing when I finish the query...
 
I know there are 19783 entries in this table... When I try to get any
more specific than one row the query never finishes... 
 
EXAMPLE (Not working):
 
$sql = "SELECT NewHireNBID, ConfUserFName, ConfUserLName from NewHire
WHERE RequestID BETWEEN '123386' AND '123419'"
 
print("NOTE: executing $sql<br>");
$result=mssql_query($sql, $con);
print("NOTE: done executing $sql<br>");
 
Now, I have run this query against the DB and I should get 3 rows
back... however this query will just sit... and sit... until it
eventually times out...  I have read the documentation regarding slow
response... I have checked for the dump file, and it's configuration...
just to make sure I wasn't missing anything I set it up to dump thinking
I might find something useful... It works, the dump file gets to like
40+mb I stop the query... I don't feel DNS is an issue as it works just
fine for a specific query... Plus I can forward and reverse the server
form this host all day with no issues...
 
Here a snapshot of what I get in the log file:
 
dblib.c:1433:dbnextrow()
dblib.c:1447:dbnextrow() dbresults_state = 2
dblib.c:1509:leaving dbnextrow() returning -3
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 7
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 7
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 6
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 6
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 5
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 5
dblib.c:1433:dbnextrow()
dblib.c:1447:dbnextrow() dbresults_state = 2
dblib.c:1509:leaving dbnextrow() returning -3
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 7
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 7
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 6
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 6
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 5
dblib.c:2480:dbdatlen() type = 39
dblib.c:2486:leaving dbdatlen() returning 5
 
I am stuck as to what I should look at next? It works fine on the simple
query but not anything that returns more than one row... 
 
Any ideas? 
 
-Ryan