market-farming AT lists.ibiblio.org
Subject: Market Farming
List archive
- From: <sunnfarm AT netscape.com>
- To: "Market Farming" <market-farming AT lists.ibiblio.org>
- Subject: Re: [Market-farming] Greenhouse heater support
- Date: Mon, 22 Nov 2010 08:31:00 -0800
I made one for a Modine heater of the same design and weight as the Reznor. I used two 2" x 8' long pieces of plumbing pipe joined at the top with a 3.5' length of 3" angle welded to the pipes. I sunk the pipe 3ft into the ground and suspened the heater between the pipes. Works great... Bob.
Sunny Meadow Farm
Bridgeton, NJ.
--- grizzdover AT gmail.com wrote:
From: grizzdover AT gmail.com
To: Market Farming <market-farming AT lists.ibiblio.org>
Subject: [Market-farming] Greenhouse heater support
Date: Mon, 22 Nov 2010 09:11:42 -0600
--- grizzdover AT gmail.com wrote:
From: grizzdover AT gmail.com
To: Market Farming <market-farming AT lists.ibiblio.org>
Subject: [Market-farming] Greenhouse heater support
Date: Mon, 22 Nov 2010 09:11:42 -0600
Hello All,
I am looking at a greenhouse heater (Reznor UDAP 250) that weighs 215lbs. I think this is too much weight to suspend from our greenhouse frame. I'm wondering if it is possible to purchase or make a "stand" that would support the perimeter of the heater base? Or, what would be some other ideas to support the heater at least 5 ft. off the ground without hanging it from the greenhouse structure.
Thanks in advance,
Ben Saunders
Turtle Farm
Granger, Iowa
Netscape. Just the Net You Need.
-
[Market-farming] Greenhouse heater support,
grizzdover, 11/22/2010
- Re: [Market-farming] Greenhouse heater support, MAsteveINE, 11/22/2010
- Re: [Market-farming] Greenhouse heater support, Richard Robinson, 11/22/2010
- <Possible follow-up(s)>
-
Re: [Market-farming] Greenhouse heater support,
SaladG, 11/22/2010
- Re: [Market-farming] Greenhouse heater support, pech, 11/23/2010
- Re: [Market-farming] Greenhouse heater support, sunnfarm, 11/22/2010
Archive powered by MHonArc 2.6.24.