ocba AT lists.ibiblio.org
Subject: Orange County, NC Beekeepers
List archive
- From: Rob Cook <crookkohler AT bellsouth.net>
- To: Randall Austin <ra41717 AT gmail.com>, Orange County Beekeepers Association <ocba AT lists.ibiblio.org>
- Subject: Re: [ocba] large group of bees in feeder
- Date: Fri, 6 May 2016 17:43:05 +0000 (UTC)
They were on the side of the screen where the pool of nectar should be. So I guess I have a bee leak.Time to formulate a plan B. I will look for the leak and get it sealed up.
Thanks,
Rob
On Friday, May 6, 2016 1:25 PM, Randall Austin <ra41717 AT gmail.com> wrote:
Rob,
To clarify, were the bees on the correct side of the screen or the incorrect side?
If on the incorrect side, you have a bee leak either around the edges of the screen or where the cover and the top edge of the feeder come together. A bit of hot glue can plug a leak in the screen. You may try a strip of foam insulating strip, like you would use around a door, on the top edge of the feeder if it is uneven and allowing bee access. Get creative. Whatever works, works.
If the bees are on the correct side, were they alive or dead?
If alive, there's probably no problem, the bees are just making vigorous use of the feeder in this bustery weather.
If dead, there may be too much space between the screen and the access wall, creating a morass that the bees can drown in. Using a pair of pliers, it should be a fairly simple matter to adjust the screen so the gap is a bit smaller, say around a half inch.
Randall
On 5/6/2016 12:56 PM, Rob Cook wrote:
To clarify, were the bees on the correct side of the screen or the incorrect side?
If on the incorrect side, you have a bee leak either around the edges of the screen or where the cover and the top edge of the feeder come together. A bit of hot glue can plug a leak in the screen. You may try a strip of foam insulating strip, like you would use around a door, on the top edge of the feeder if it is uneven and allowing bee access. Get creative. Whatever works, works.
If the bees are on the correct side, were they alive or dead?
If alive, there's probably no problem, the bees are just making vigorous use of the feeder in this bustery weather.
If dead, there may be too much space between the screen and the access wall, creating a morass that the bees can drown in. Using a pair of pliers, it should be a fairly simple matter to adjust the screen so the gap is a bit smaller, say around a half inch.
Randall
On 5/6/2016 12:56 PM, Rob Cook wrote:
This morning I went to feed my bees in the hive and noticed a large knot of bees all together on the inside of the screen of the top feeder. It reminded me of a mini swarm. What could be the reasons for this and should I be concerned? Remedies?
Rob Crook
_________________________________________ ocba mailing list | North Carolina Beekeeping| http://www.theocba.org/ Manage Your Subscription: http://lists.ibiblio.org/mailman/listinfo/ocba/
-
[ocba] large group of bees in feeder,
Rob Cook, 05/06/2016
-
Re: [ocba] large group of bees in feeder,
Randall Austin, 05/06/2016
- Re: [ocba] large group of bees in feeder, Rob Cook, 05/06/2016
-
Re: [ocba] large group of bees in feeder,
Randall Austin, 05/06/2016
Archive powered by MHonArc 2.6.24.