Skip to Content.
Sympa Menu

freetds - Re: [freetds] fisql segmentation fault with AIX 6.1 Freetds 0.91

freetds AT lists.ibiblio.org

Subject: FreeTDS Development Group

List archive

Chronological Thread  
  • From: "James K. Lowden" <jklowden AT freetds.org>
  • To: freetds AT lists.ibiblio.org
  • Subject: Re: [freetds] fisql segmentation fault with AIX 6.1 Freetds 0.91
  • Date: Fri, 27 Apr 2012 10:28:57 -0400

On Wed, 25 Apr 2012 11:00:11 -0400
"Mccabe, Lisa L" <lisa.mccabe AT verizon.com> wrote:

> The following duplicates were found:
> Symbol Source-File(Object) OR Import-File{Shared-object}
> -------------------------
> -------------------------------------------------
> .bcopy {/usr/lib/libreadline.a[libreadline.so.6]}
> ** Duplicate ** moveeq.s (/usr/lib/libc.a[moveeq.o])
> ...
]> ld: 0711-768 WARNING: Object fisql.o, section 1, function .strcat:
> The branch at address 0x78c is not followed by a recognized no-op
> or TOC-reload instruction. The unrecognized instruction is 0x806100A8.

Well, that doesn't sound good, does it?

I'm afraid you're going to have to dig in and figure out what the
linker is doing. It sounds like the issue is connected to readline
somehow. If so, bsqldb (and in fact most of the utilities) will work
but e.g. sqsh won't.

HTH.

--jkl




Archive powered by MHonArc 2.6.24.

Top of Page