Skip to Content.
Sympa Menu

baslinux - Re: [BL] An an unusual project . .

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Sean Mozo <seanpmthe1st AT gmail.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] An an unusual project . .
  • Date: Sat, 25 Feb 2017 17:05:50 -0500

Phil,

This reply may be late and you've already sorted things out for yourself, nevertheless I just wanted to chime in with a suggestion as follows:

1. Copy your needed modules and the ssh add-on to a third floppy.

http://distro.ibiblio.org/baslinux/add-ons/2_2_26/modules/scsi/scsi_mod.o
http://distro.ibiblio.org/baslinux/add-ons/2_2_26/modules/scsi/aha1542.o
http://distro.ibiblio.org/baslinux/add-ons/2_2_26/modules/net/ne.o
http://distro.ibiblio.org/baslinux/add-ons/ssh.tgz

2. After booting with the first two floppies and logging in by pressing enter, insert and mount the floppy you copied those files to.

3. Change to the /fd directory and use insmod to load your modules.

4. Set up your network connection. (e.g. "ifconfig eth0 192.168.1.100" and "route add default gw 192.168.1.1")

5. Use "pkg ssh.tgz" to install ssh add-on.

After that you should be set to mount your hard drive and dd your image through ssh.

The caveat here is having enough RAM to load all of this into the ramdisk BL is operating from so hopefully this isn't the case for you.





Archive powered by MHonArc 2.6.24.

Top of Page