|
It would be interesting to weigh the apple pulp, before and after
pressing.
If somebody already mentioned this, I apologize.
Benadryl haze.
I could take a 1/4" thick, 1" square slab of a 'typical' apple.
Weigh it.
Place a 10 lb. weight on it, shake the juice off, and weigh it again. (this
was 10 psi pressure)
Increase to 20 lb.weigh, 40lb, , etc, until the juice / pressure ratio
curve flattens out.
What is the 'reasonable economical' pressure / time to recover (most of)
the juice?
Like Mark, I am looking at building a press, the basket being Perforated
Stainless steel.
Thoughts?
Murph
|
Archive powered by MHonArc 2.6.24.