Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] NRCS for 'Rolling Thunder'

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: Todd Lister <toddlister1 AT gmail.com>
  • To: Market Farming <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] NRCS for 'Rolling Thunder'
  • Date: Sat, 31 Dec 2011 20:43:40 -0500

Thanks Richard,
Just had knee surgery and as I age (60 this year) I think the 18" would be trouble.
Was the 18" for clearing plants? Seems like I could have a detachable cleat that could bridge the door and be removed after relocating the house.
I picture a vertical strut that could be attached  to the door posts and sent into the ground for stability of door frame. 
Todd


On Sat, Dec 31, 2011 at 7:13 PM, Richard Robinson <rrobinson AT nasw.org> wrote:
On 12/31/2011 at 6:55:58 PM, Todd Lister wrote:
> Keith,
> Great response. Pretty much in line with what I thought. Briefly, can you
> give me an idea of your approach to altering an existing house to be movable?
> I've got a 30x72 NRCS/Equip  house and a few 48' houses, one x 24 and one x
> 30. Sure wish I could convert at least one of the shorter ones. I am a 30+
> year carpentry mechanic and have felt for a while that I should make the
> move. My local agent in rural Georgia was quite skittish when I inquired
> about it prior to the award. I knew it was viable because I had read positive
> things on the net. Foolishly, I went with the stationary. Any feedback
> greatly appreciated. Todd Lister Vesta, Ga

The Rimol house uses off-the-shelf wheels at the base of each bow, riding on a pipe track.
It would not be hard to convert a stationary house to a rolling one by attaching such
wheels to your bows. You can see a picture in the gallery section of the Rimol site. The
wheels can be sourced through chain-link fence suppliers.

http://www.rimolgreenhouses.com/product_info.php?cPath=22&products_id=734
click on "More photos here"

the house needs to be attached to groundposts, which can be done in a variety of ways.
Mine uses struts about 3 feet long, clamped to the bow on one end and the groundpost on
the other end.

The endwalls need to be framed in such a way that the base of the wall can be liberated
from the ground on moving day. For mine, this means the verticals terminate at a
horizontal member about 18" above the ground. That horizontal member is attached to a
short piece of tubing that in turn slips into a ground post that sits just below the level
of the horizontal. On moving day, I undo this assembly. The downside of this arrangement
is that I need to step over that 18" going in and out of the house. I think it would be
easy enough to build an endwall to avoid this problem.


 Richard Robinson
 www.nasw.org/users/rrobinson/
 Hopestill Farm
 www.hopestill.com


_______________________________________________
Market-farming mailing list
Market-farming AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/market-farming

Market Farming List Archives may be found here:
https://lists.ibiblio.org/sympa/arc/market-farming/
Unsubscribe from the list here (you will need to login in with your email
address and password):
http://lists.ibiblio.org/mailman/options/market-farming




Archive powered by MHonArc 2.6.24.

Top of Page