market-farming AT lists.ibiblio.org
Subject: Market Farming
List archive
- From: Richard Robinson <rrobinson AT nasw.org>
- To: Market Farming <market-farming AT lists.ibiblio.org>
- Subject: Re: [Market-farming] roll up sides on tunnels
- Date: Wed, 26 Oct 2011 14:54:23 -0400
On 10/26/2011 at 2:53:13 PM, KAKerby AT aol.com wrote:
> the other side of the greenhouse, with the exact same assembly, didn't work
> so well. The slip-fit joints for the roller bar kept slipping, such that
> with each crank of the crank arm, the farther sections of pipe would only
> roll 3/4 or even 1/2 way around instead of one full revolution to match the
> crank arm.
You can screw the pieces of pipe together using self-tapping screws to
prevent slippage.
Richard Robinson
www.nasw.org/users/rrobinson/
Hopestill Farm
www.hopestill.com
-
[Market-farming] roll up sides on tunnels,
eglatyne tds.net, 10/26/2011
- <Possible follow-up(s)>
-
Re: [Market-farming] roll up sides on tunnels,
KAKerby, 10/26/2011
- Re: [Market-farming] roll up sides on tunnels, Richard Robinson, 10/26/2011
Archive powered by MHonArc 2.6.24.